Asko T208CW Use and Care Guide English - Page 26
Step 7
View all Asko T208CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
STEP 7: END OF PROGRAM Cycle completed successfully Start new After the end of the drying program, the display will indicate that the program has been successfully completed ("Cycle completed successfully"). Anti creasing Cycle completed successfully If you have selected the "Anti-crease" option, the dryer will continue to operate after the end of the drying cycle for the amount of time specified upon selection of this program setting. Cycle completed successfully Start new Add fav 5 6 After the drying cycle, you have the possibility to save the program as a favorite program (see "Favourite programs"). Open the door and remove the laundry from the dryer. Clean door filter Clean the net filter in the door Ok (see chapter "CLEANING AND MAINTENANCE"). 6 Make sure the dryer drum is empty, then close the door. 5 minutes after the end of the program or last activation, the display will switch off to standby mode in order to save power. The display will light up again if you press the ON/OFF button or open the dryer door. After each drying cycle, clean the net filter in the door and empty the condensate tank. See chapter "CLEANING AND MAINTENANCE". A clogged net filter and heat pump filter may result in activation of the automatic overheating switch-off device. Clean the filter, wait for the machine to cool down, and try running it again. If the dryer still fails to start, call a service technician. After the drying process, unplug the dryer power cord from the power outlet. 26 Customer Care Center, 1-800-898-1879, www.askona.com