Asko T411VDW Installation Instructions English - Page 2

Warning

Page 2 highlights

Dear Customer, Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. See also the general Safety Instructions in the Use & Care Guide. Cosmetic damage must be reported to the ASKO dealer within five days from the date of purchase. As soon as you unpack the machine, thoroughly check it for cosmetic damage. INSTALLATION WARNING - Risk of fire. Install the clothes dryer according to the manufacturer's instructions and local codes. Clothes dryer installation must be performed by a qualified installer. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the applience manufacturer that is UL approved for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire. To reduce the risk of of severe injury or death, follow all installation instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. WARNING For proper ventilation, the machine should not be installed behind a door. The tumble dryer's toe kick ventilation must not be blocked by a rug or the like. DRYER PLACEMENT The dryer can be either freestanding or installed onto a washing machine. The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may be longer due to limited amount of available air. Do not place the dryer in a room where temperature can drop below 0 °C (32 °F), as the machine may not operate correctly at such low temperatures or may freeze, which can result in damage to the machine. Install the dryer in a room with adequate ventilation and a temperature between 10 °C (50 °F) and 25 °C (77 °F). Do not place the dryer behind lockable or sliding doors, or doors with a hinge on the opposite side of the dryer door hinge. Install the dryer in such way that the door can always be freely opened. As this is a vented dryer, it does not have a condensate tank. The handle has solely a decorative purpose and is fixed; it is not intended for opening. If excessive force is applied, the handle may break. 2 Customer Care Center, 1-800-898-1879, www.askona.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

2
Customer Care Center, 1-800-898-1879, www.askona.com
WARNING
- Risk of
re.
Install the clothes dryer according to
the manufacturer's instructions and
local codes.
Clothes dryer installation must be
performed by a quali
ed installer.
Do not install a clothes dryer with
exible plastic venting materials.
If
exible metal (foil type) duct is
installed, it must be of a speci
c
type identi
ed by the applience
manufacturer that is UL approved
for use with clothes dryers. Flexible
venting materials are known to
collapse, be easily crushed, and trap
lint. These conditions will obstruct
clothes dryer air
ow and increase the
risk of
re.
To reduce the risk of of severe
injury or death, follow all installation
instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
WARNING
For proper ventilation, the machine
should not be installed behind a door.
The tumble dryer's toe kick ventilation
must not be blocked by a rug or the
like.
DRYER PLACEMENT
The dryer can be either freestanding or installed
onto a washing machine.
The dryer emits heat. Therefore, do not place it in
a very small room, as the drying process may be
longer due to limited amount of available air.
Do not place the dryer in a room where
temperature can drop below 0 °C (32 °F), as the
machine may not operate correctly at such low
temperatures or may freeze, which can result in
damage to the machine.
Install the dryer in a room with adequate ventilation
and a temperature between 10 °C (50 °F) and 25 °C
(77 °F).
Do not place the dryer behind lockable or sliding
doors, or doors with a hinge on the opposite side of
the dryer door hinge. Install the dryer in such way
that the door can always be freely opened.
As this is a vented dryer, it does not have a
condensate tank. The handle has solely a decorative
purpose and is
xed; it is not intended for opening. If
excessive force is applied, the handle may break.
INSTALLATION
Dear Customer,
Read these instructions carefully and completely before you install the machine. The installation should
be carried out by a quali
ed person who is familiar with all local codes and ordinances for electrical and
plumbing connections. See also the general Safety Instructions in the Use & Care Guide.
Cosmetic damage must be reported to the ASKO dealer within
ve days from the date of purchase. As soon
as you unpack the machine, thoroughly check it for cosmetic damage.