Asko T701 User manual Quick Start Guide EN - Page 2
Quick Start Procedures - dryer
View all Asko T701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
QUICK START PROCEDURES T701 1. Press the Power button to turn on the machine. 2. Load the laundry into the dryer. 3. Check the lint filter. Clean it, if needed. 4. Check that the door is clear of laundry then close it firmly. (The door wont shut if its slammed.) 5. Turn the Program Control knob to the desired program (1 or 2) or drying time (90, 60, or 30 minutes). 6. If you select timed drying, turn the Temperature Control knob to the desired setting. 7. Make your program option selections (e.g., Anti-crease). 8. Press Start. The machine will start. Options Buzzer You have the option to turn the buzzer on or off. If you turn the buzzer on, it will sound for three seconds when the program is complete. Anti-crease Quick Cooling The Anti-crease option is designed to prevent garments from becoming wrinkled if youre unable to remove them from the dryer right away. When you select this option, after the drying program is complete the drum will continue to rotate for three seconds every minute until the door is opened or one hour has passed. If the buzzer is on, it will sound each time the anti-crease program activates. This option reduces the cool-down time from 18 minutes to 9 minutes. Quick cooling can not be selected with the Anti-crease option. CLEANING THE LINT FILTER Although the lint in your ASKO dryer will be minimal, the lint filter should be cleaned after each load to ensure maximum air flow and prevent possible overheating. To clean the filter, follow the steps below: 1. Grasp the handle and pull it toward you. 2. Remove the filter from the holder by pulling it up. 3. Open the filter and gently brush away any lint. 4. Fold the filter together and return it to the holder on the door. 5. Push the holder in until it snaps into place NOTE: We recommend that you clean the lint filter after every load. OVERHEATING PROTECTION The dryer has a protection device that shuts the machine off if the temperature becomes too high. Overheating could occur if the lint filter is clogged or the fan needs to be cleaned. If the dryer shuts off during a program, check the lint filter first. If it is clean, it could be the fan needs to be cleaned. See your Use and Care Guide for instructions on how to clean the fan. Art. No. 80 646 42 rev 02