Asko W4114CW Design Guide - Page 6

ASKO DISHWASHERS Opening Dimensions DISHWASHERS D OPENING DEPTH TOP VIEW H OPENING HEIGHT W OPENING WIDTH SIDE VIEW FRONT VIEW NOTE: 31/2" (89) finished returns will be visible and should be finished to match cabinetry. 31/2" (89) FINISHED RETURN 3/4" (19) TYPICAL W FRAMELESS CABINETRY 31/2" (89) FINISHED RETURN FILLER W FRAMED CABINETRY IMPORTANT NOTE: All indoor models can accommodate varying opening widths, however, 24" (610) and 235/8" (60 cm) are the two most common. A 235/8" (60 cm) opening will provide minimum reveals. IMPORTANT NOTE: Panel ready models installed with a stainless steel accessory panel require a 24" (610) opening width. OPENING Indoor Model Outdoor Model W 235/8" (600) 247/8" (632) H 341/2" (876) 351/2" (902) D 24" (610) 251/4" (641) A minimum 31/2" (89) finished return is required on all sides of the opening. Framed cabinets will require additional finished filler material behind the face frame for a proper installation. Refer to the illustration. Indoor models include top and side trim to accommodate varying opening dimensions. The top and side trim can be removed to achieve minimum reveals. For ADA installations and height restricted openings, all indoor, non-XXL models can be installed in a 321/4" (819) opening by removing the top trim and lowering the side trim. For openings exceeding 341/2" (876) in height, the door panel can extend above the top of the door, however, the door panel could affect control panel interaction. A filler above the unit is also required. Refer to the illustration below. COUNTERTOP FILLER DOOR PANEL SIDE VIEW Panel height filler 6 | Asko Customer Care 800.222.7820