Asko W6441 User manual General Use & Care Guide EN - Page 20

W6761 ERROR MESSAGES Error messages will display in the LCD window if faults occur while a program is in progress. The table below defines each possible error message. To remove the message, turn the power off or change the program. ERROR MESSAGE 0000 Door lock fault Overflow Pressure sensor fault Temperature stop fault Thermistor fault Wash motor fault Water inlet fault Water outlet fault SOLUTION When this symbol flashes at the lower right corner of the display it merely means the glass door isn't closed securely. Close the door and try again. If this message flashes at the top right of the LCD window, the machine has failed to spin. This could be because the load is out of balance. Turn the power off then on again. Open the door and redistribute the washing. Run the Spin program again. Call a service technician. Call a service technician Call a service technician. Call a service technician. Call a service technician. Call a service technician. Make sure the water tap is open. Check the pin trap for possible blockage. Make sure the outlet hose isn't kinked. Page 20