Asus A88X-PRO A88X-PRO User's Manual - Page 126
Installing Serial ATA hard disks, 4.4.3 Setting the RAID item in BIOS, Advanced, RAID]
View all Asus A88X-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 4.4.3 Setting the RAID item in BIOS You must enable the RAID function in the BIOS Setup before creating RAID set(s) using SATA HDDs. To do this: 1. Enter the BIOS Setup during POST. 2. Go to the Advanced menu > SATA Configuration, and then press . 3. Set the type of the SATA connectors to [RAID]. 4. Save your changes, and then exit the BIOS Setup. See section 3.5.2 SATA Configuration for details. Chapter 4 ASUS A88X-PRO 4-17