Asus A8N-SLI A8N-SLI English edition user's manual, version E1947 - Page 53
A8N-SLI IEEE 1394 connector
UPC - 610839124862
View all Asus A8N-SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. See related BIOS item in page 4-40. A8N-SLI ® CHASSIS (Default) A8N-SLI Chassis alarm lead 11. IEEE 1394 connector (10-1 pin IE1394_2) This connector is for the IEEE 1394a module. Connect the IEEE 1394 module cable to this connector, then install the module to a slot opening at the back of the system chassis. +5VSB_MB Chassis Signal GND +12V TPB1+ GND TPA1+ GND +12V TPB1GND TPA1- A8N-SLI ® 1 IE_1394_2 A8N-SLI IEEE 1394 connector Never connect a U S B c a b l e to the IEEE 1394 connectors. Doing so will damage the motherboard! ASUS A8N-SLI 2-27