Asus AP1710-E1 AP1710-E1 English version manual - Page 100
Gigabit LAN controller setting 3-pin LAN_EN1
View all Asus AP1710-E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
4. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. NCLV-D KBPWR1 12 23 +5V (Default) +5VSB NCLV-D Keyboard power setting 5 . Gigabit LAN controller setting (3-pin LAN_EN1) These jumpers allow you to enable or disable the onboard Broadcom BCM5721 Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature. NCLV-D NCLV-D LAN_EN1 setting LAN_EN1 21 32 Enable (Default) Disable 4-6 Chapter 4: Motherboard information
Chapter 4:
Motherboard information
Chapter 4:
Motherboard information
Chapter 4:
Motherboard information
Chapter 4:
Motherboard information
Chapter 4:
Motherboard information
4-6
4-6
4-6
4-6
4-6
4.
4.
4.
4.
4.
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
NCLV-D
NCLV-D Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
1
2
23
5.
5.
5.
5.
5.
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
These jumpers allow you to enable or disable the onboard Broadcom
BCM5721 Gigabit LAN controller. Set to pins 1-2 to activate the
Gigabit LAN feature.
NCLV-D
21
3
2
Enable
(Default)
Disable
NCLV-D LAN_EN1 setting
LAN_EN1