Asus AP1720-E2 AP1720-E2 English version manual - Page 51
SATA backplane connections
View all Asus AP1720-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2.9.2 SATA backplane connections (in AA4 models only) A SATA backplane comes pre-installed in the AP1720-E2 AA4 model. The SATA backplane has four 15-pin SATA connectors to support Serial ATA hard disk drives. The backplane design incorporates a hot swap feature to allow easy connection or removal of SATA hard disks. The LED on the backplane connect to the front panel LED to indicate HDD status. See section "1.6 LED information" for details. Front side The front side of the SATA backplane faces the front panel when installed. This side includes four SATA connectors for the hot swap drive trays. CON1 CON3 CON5 CON7 Each SATA connector is labeled (CON1, CON3, CON5, CON7) so you can easily determine their counterpart connectors at the back side of the backplane. Refer to the table below for reference. Drive status LEDs HDD Device HDD 1 HDD 2 HDD 3 HDD 4 Front side connector CON1 CON3 CON5 CON7 Back side connector CON2 CON4 CON6 CON8 ASUS AP1720-E2 barebone server 2-31