Home » Asus Manuals » Motherboards » Asus AT4NM10-I » Manual Viewer

Asus AT4NM10-I User Manual - Page 24

AT4NM10-I Fan connectors

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

6. CPU and chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. These fan connectors are not jumpers! Do not place jumper caps on the fan connectors! AT4NM10-I AT4NM10-I Fan connectors 7. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AT4NM10-I AT4NM10-I Front panel audio connector We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. 1-15 Chapter 1: Product introduction

Section	Page
Notices	5
Safety information	6
About this guide	6
AT4NM10-I specifications summary	8
Chapter 1	10
Product introduction	10
1.1 Before you proceed	10
1.2 Motherboard overview	11
1.2.1 Motherboard layout	11
1.2.2 Layout contents	11
1.3 Central Processing Unit (CPU)	12
1.4 System memory	12
1.4.1 Overview	12
1.4.2 Memory configurations	13
1.5 Expansion slot	17
1.5.1 Installing an expansion card	17
1.5.2 Configuring an expansion card	17
1.5.3 PCI slot	17
1.6 Jumpers	18
1.7 Connectors	20
1.7.1 Rear panel connectors	20
1.7.2 Internal connectors	21
1.8 Software support	27
1.8.1 Installing an operating system	27
1.8.2 Support DVD information	27
Chapter 2	28
BIOS information	28
2.1 Managing and updating your BIOS	28
2.1.1 ASUS Update utility	28
2.1.2 ASUS EZ Flash 2	29
2.1.3 ASUS CrashFree BIOS	30
2.2 BIOS setup program	31
2.3 Main menu	31
2.3.1 System Time	32
2.3.2 System Date	32
2.3.3 SATA 1/2	32
2.3.4 Storage Configuration	33
2.3.5 System Information	33
2.4 Advanced menu	33
2.4.1 CPU Configuration	34
2.4.2 Chipset	34
2.4.3 Onboard Devices Configuration	35
2.4.4 USB Configuration	36
2.4.5 PCI PnP	37
2.5 Power menu	37
2.5.1 Suspend Mode	37
2.5.2 ACPI 2.0 Support	37
2.5.3 ACPI APIC Support	37
2.5.4 Control EuP	38
2.5.5 APM Configuration	38
2.5.6 Hardware Monitor	38
2.6 Boot menu	39
2.6.1 Boot Device Priority	39
2.6.2 Boot Settings Configuration	39
2.6.3 Security	40
2.7 Tools menu	41
2.7.1 ASUS EZ Flash 2	41
2.7.2 Express Gate	41
2.7.3 AI NET 2	42

Match case Limit results 1 per page

1-15

Chapter 1: Product introduction

These fan connectors are not jumpers! Do not place jumper caps on the fan connectors!

AT4NM10-I Fan connectors

AT4NM10-I

CPU and chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

AT4NM10-I

AT4NM10-I Front panel audio connector

We recommend that you connect a high-deﬁnition front panel audio module to this connector

to avail of the motherboard’s high-deﬁnition audio capability.