Asus AT5NM10T-I User Manual - Page 23
Chassis intrusion connector 4-1 pin CHASSIS, Internal speaker connector 4-pin SPEAKER
View all Asus AT5NM10T-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. 5. Internal speaker connector (4-pin SPEAKER) The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. ASUS AT5NM10-I E5179_AT5NM10-I.indb 14 1-14 12/22/09 5:56:02 PM