Asus BA5120 User Manual - Page 29
back of the drive, then connect the, Connect one end of the Serial ATA
View all Asus BA5120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Swing out the HDD cage. 4. With the HDD label side up, carefully insert the drive into the 3.5-inch bay and push the drive into the bay until its screw holes align with the holes 5 on the drive bay. 4 5. Fasten the screw and secure the drive. 3 6. Swing back the HDD cage. 7. Push in the bay locks to double secure the hard disk drive. 8. Connect one end of the Serial ATA cable to the SATA connector at the 8 back of the drive, then connect the 7 other end to a Serial ATA connector on the motherboard. Connect a 15-pin Serial ATA power plug from the power supply unit to the 15-pin power connector at the back of the drive. - OR - Connect a 4-pin (female) power plug from the power supply unit to the 4-pin (male) power connector at the back of the drive. Serial ATA cable Serial ATA power cable If your Serial ATA HDD has both 4-pin and 15-pin connectors at the back, use either the 15-pin SATA power adapter plug OR the legacy 4‑pin power connector. DO NOT use both to prevent damage to components and to keep the system from becoming unstable. ASUS BA5120/AS-D672 2-15