Asus DSL-AC3100 users manual in English - Page 46

Restoring the firmware via the Rescue mode., User name, Password, IP address, SSID 2.4GHz

Get Asus DSL-AC3100 PDF manuals and user guides View all Asus DSL-AC3100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

How do you restore the system to its default settings? • Press the Reset button at the rear panel of the wireless router for more than five seconds. • Refer to the section Restoring/Saving/Uploading settings of this user manual. The following are the factory default settings: User name: Password: IP address: SSID (2.4GHz): SSID (5GHz): admin admin router.asus.com Refer to the label at the bottom of the router Refer to the label at the bottom of the router Restoring the firmware via the Rescue mode. If the firmware upgrade fails, do the Rescue mode process. Please follow these steps: 1. Ensure that your computer has a static IP address such as 192.168.1.xx (xx can be any number between 2 and 254). 2. Turn off your DSL-AC3100. Hold the Reset button then power on your device for five seconds. When the power LED blinks, release the Reset button. 3. On your web browser, enter http://192.168.1.1. The interface below appears. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
46
User name:
admin
Password:
admin
IP address:
router.asus.com
SSID (2.4GHz):
Refer to the label at the bottom of
the router
SSID (5GHz):
Refer to the label at the bottom of
the router
How do you restore the system to its default settings?
•
Press the Reset button at the rear panel of the wireless
router for more than five seconds.
•
Refer to the section
Restoring/Saving/Uploading settings
of this user manual.
The following are the factory default settings:
Restoring the firmware via the Rescue mode.
If the firmware upgrade fails, do the Rescue mode process. Please
follow these steps:
1. Ensure that your computer has a static IP address such as
192.168.1.xx (xx can be any number between 2 and 254).
2. Turn off your DSL-AC3100. Hold the Reset button then power
on your device for five seconds. When the power LED blinks,
release the Reset button.
3. On your web browser, enter
. The interface
below appears.