Asus DSL-N12U B1 users manual - Page 6
USB 2.0 / USB 1.1 port, Power DC-In port
View all Asus DSL-N12U B1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 Power LED Off: No power. On: Device is ready. Flashing slow: Rescue mode Flashing quick: WPS is processing. 2 ADSL LED Solid light: ADSL link is established. Flashing: No ADSL link or unable to establish ADSL link. 3 WAN LED Off: No power or no physical connection. On: Has physical connection to a wide area network (WAN). 4 LAN LED Off: No power or no physical connection. On: Has physical connection to a local area network (LAN). 5 Wi-Fi LED Off: No Wi-Fi signal. On: Wireless system is ready. Flashing: Transmitting or receiving data via wireless connection. 6 Reset button This button resets or restores the system to its factory default settings. 7 Power (DC-In) port Insert the bundled AC adapter into this port and connect your router to a power source. 8 Power switch Press this button to turn the power on/off. 9 USB 2.0 / USB 1.1 port Insert a USB 2.0/USB 1.1 device such as USB hard disks or USB flash drives into this port. Insert your iPad's USB cable into this port to charge your iPad. Insert your printer's USB cable into one of these ports to set up your network printer. For details, refer to the section Setting up your network printer. 10 LAN 1 ~ 4 ports Connect network cables into these ports to establish LAN connection. 11 WPS button This button launches the WPS Push Button Configuration process. 12 Wi-Fi switch Switch to turn the WiFi feature on/off. 13 ADSL port Connect to a splitter or to a telephone outlet via an RJ-11 cable.