Asus F1A75 User Manual - Page 37
F1A75 USB2.0 connectors
View all Asus F1A75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
8. USB 2.0 connectors (10-1 pin USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed. USB78 USB910 USB+5V USB_P8USB_P8+ GND NC USB+5V USB_P10USB_P10+ GND NC F1A75 USB+5V USB_P7USB_P7+ GND USB+5V USB_P9USB_P9+ GND PIN 1 PIN 1 F1A75 USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 9. USB 3.0 connector (20-1 pin USB3_34) This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customized front panel installation, with ASUS USB 3.0 header, you can have a front panel USB 3.0 solution. USB3_34 F1A75 F1A75 USB3.0 front panel connector The USB 3.0 module is purchased separately. ASUS F1A75 1-25