Asus Genie Installation Guide - Page 20
Changing the I/O Plate
View all Asus Genie manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Changing the I/O Plate 1. Detach the I/O plate from the chassis by sliding it to the right. (CAUTION: Be careful when removing the I/O plate. The tabs that secure it are tight.) After removing the existing I/O plate, the back panel exposes an opening for the new I/O plate to fit your motherboard I/O connectors. 2. Install a new I/O plate by fitting it to the I/O opening and sliding it to the left until it completely fits in place. 3. Make sure that the I/O plate slide in behind the securing tabs on the frame. 20 Chapter 2: Optional Procedures
20
Chapter 2:
Optional Procedures
Changing the I/O Plate
1.
Detach the I/O plate from
the chassis by sliding it to
the right. (CAUTION: Be
careful when removing the
I/O plate. The tabs that
secure it are tight.)
After removing the existing I/O
plate, the back panel exposes
an opening for the new I/O
plate to fit your motherboard I/O
connectors.
2.
Install a new I/O plate by
fitting it to the I/O opening
and sliding it to the left until
it completely fits in place.
3.
Make sure that the I/O
plate slide in behind the
securing tabs on the frame.