Asus H110T/CSM Users manual English - Page 14
Rear panel connectors, HDMI port., DisplayPort., LAN RJ-45 port., DC power connector., USB 3.0 ports
View all Asus H110T/CSM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Rear panel connectors 12 3 4 5 2 6 7 1. DC power connector. Insert the power adapter into this port. • It can support both 19V and 12V DC input. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 90W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel. - Use a high-rated adapter (above 90W) when a high-rated CPU (45W or higher CPU) is installed on the system. 2. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 / 2.0 devices. • USB 3.0 devices can only be used for data storage. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance from your USB 3.0 devices. • Due to the design of the Intel® 100 series chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. 3. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected content. 4. DisplayPort. This port is for DisplayPort-compatiable devices. 5. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Activity Link Speed LED LED LAN port 1-6 Chapter 1: Product introduction