Asus H61M-D H61M-D User's Manual - Page 24

7. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. F_PANEL +PWR_LED- PWR BTN PLED+ PLEDPWRBTN# GND HDD_LED+ HDD_LED- Ground RSTCON# (NC) H61M-D PIN 1 +HDD_LED- RESET H61M-D System panel connector • System power LED (2-pin PWR_LED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin HDD_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HDD LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWR_BTN) This connector is for the system power button. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 1.8 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. H61M-D SB_PWR ON OFF Standby Power Powered Off H61M-D Onboard LED ASUS H61M-D 1-17