Asus H81-M2 H81-M2 User's Manual - Page 20
Connectors, Rear panel connectors - wake on lan
View all Asus H81-M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. USB device wake-up (USBPWF) This jumper allows you to enable or disable the USB device wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the USB keyboard or by clicking on the USB mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. USBPWF H81M2 12 23 +5V +5VSB (Default) H81M2 USB device wake up 1.7 Connectors 1.7.1 Rear panel connectors 1 2 3 45 10 9 8 7 6 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. USB 2.0 ports. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. LAN port LED indications Activity Link Speed LED LED Activity/Link LED Speed LED Status Description Status Description Off No link OFF 10Mbps connection Orange Linked ORANGE 100Mbps connection LAN port Orange (Blinking) Data activity GREEN 1Gbps connection Orange (Blinking Ready to wake then steady) up from S5 mode 1-12 Chapter 1: Product introduction