Asus K8N-E Deluxe K8N-E Deluxe User Guide - Page 46
Hardware information, CPU, Power and Chassis Fan Connectors, pin CPU_FAN, PWR_FAN,
View all Asus K8N-E Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5. CPU, Power and Chassis Fan Connectors (3-pin CPU_FAN, PWR_FAN, CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! CPU_FAN Rotation +12V GND PWR_FAN GND +12V Rotation ® CHA_FAN K8V-E K8N-E 12-Volt Fan Connectors Rotation +12V GND 6. Serial Port 2 connector (10-1 pin COM2) This connector accommodates a serial port using a serial port bracket. Connect the bracket cable to this connector then install the bracket into a slot opening at the back of the system chassis. COM2 PIN 1 ® K8V-E K8N-E Serial COM2 Bracket The serial port bracket is purchased separately. 2-24 Chapter 2: Hardware information