Asus K8V-X K8V-X user's manual - Page 51
CRC Flood Enable [Disabled], HT Frequency [800 MHz], HT DATA Width Upstream [16 BIT], HT DATA Width - k8v x motherboard manual
View all Asus K8V-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CRC Flood Enable [Disabled] Enables or disables the CRC Flood that enable the generation of syncronized packets on CRC Error. Configuration options: [Disabled] [Enabled] HT Frequency [800 MHz] Allows frequency selection of HyperTransport transfer from K8 CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz] HT DATA Width (Upstream) [16 BIT] Allows selection of HyperTransport upstream data width. Configuration options: [16 BIT] [8 BIT] HT DATA Width (Downstream) [16 BIT] Allows selection of HyperTransport downstream data width. Configuration options: [16 BIT] [8 BIT] Memory Configuration Memory Configuration Memory Configuration ECC Configuration Memory Configuration The Memory configuration menu item allows you to change the memory settings. Select an item then press to display the sub-menu. Memory Configuration Memclock Mode Bank Interleaving CAS Latency (CL) TRC TRFC TRCD TWR TRWT TRAS TRP DDR Clock Delay 2T Command [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values. Memclock Mode [ Auto] Allows you to set the memory clock mode. Set by the code using [Auto] or select [Manual] to set using one of the standard values. Configuration options: [Auto] [Limit] ASUS K8V-X motherboard 2-15