Asus M2N-E User Manual - Page 50
Chassis intrusion connector 4-1 pin CHASSIS, Optical drive audio connector 4-pin CD
UPC - 610839140343
View all Asus M2N-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. +5VSB_MB Chassis Signal GND M2N-E R CHASSIS M2N-E Chassis Intrusion Connector (Default) 8. Optical drive audio connector (4-pin CD) This connector allows you to receive stereo audio input from an optical drive such as DVD or CD-ROM.. Right Audio Channel Ground Ground Left Audio Channel M2N-E R CD (black) M2N-E Internal Audio Connector 2-26 Chapter 2: Hardware information