Asus M2N32-SLI PREMIUM VISTA User Manual - Page 49
Chassis intrusion connector 4-1 pin CHASSIS
View all Asus M2N32-SLI PREMIUM VISTA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. +5VSB_MB Chassis Signal GND M2N-SLI ® CHASSIS M2N-SLI Chassis intrusion connector (Default) ASUS M2N-SLI 2-29
ASUS M2N-SLI
2-29
7.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
M2N-SLI
M2N-SLI Chassis intrusion connector
CHASSIS
+5VSB_MB
Chassis Signal
GND
(Default)