Asus M2R32-MVP GREEN M2R32-MVP English Edition User's Manual - Page 56
with a jumper cap. Remove the jumper caps only when you intend
View all Asus M2R32-MVP GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 . Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. ® +5VSB_MB Chassis Signal GND M2R32-MVP CHASSIS (Default) M2R32-MVP Chassis intrusion connector 9 . Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. M2R32-MVP ® SPDIF_OUT GND SPDIFOUT +5V M2R32-MVP COM port connector 2-32 Chapter 2: Hardware information