Asus M3N-HT Deluxe Mempipe User Manual - Page 39
Memory configurations
View all Asus M3N-HT Deluxe Mempipe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2.4.2 Memory configurations You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC and non‑ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Configurations Mode Single-Channel DIMM_A1 (yellow) - Populated Sockets DIMM_A2 (black) DIMM_B1 (yellow) - Populated - - Dual-channel (1) Dual-channel (2) Populated Populated - Populated Populated Populated DIMM_B2 (black) - - - Populated • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • If you install four 1 GB memory modules, the system may only recognize less than 3GB because the address space is reserved for other critical functions. This limitation appears on Windows® XP/Vista 32-bit operation system which does not support Physical Address Extension (PAE). • If you install Windows® XP/Vista 32-bit operation system, a total memory of less than 3GB is recommended. • This motherboard does not support memory modules made up of 128 Mb chips. ASUS M3N-HT Deluxe Series 2-13