Asus M3N-HT User Manual - Page 88
Sata1/2/3/4 - raid
UPC - 610839160488
View all Asus M3N-HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4.3.6 SATA1/2/3/4 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Main SATA 1 Extended IDE Drive Access Mode Capacity Cylinder Head Landing Zone Sector Phoenix-Award BIOS CMOS Setup Utility [Auto] [Auto] 80 GB 0 0 0 0 Select Menu Item Specific Help Selects the type of fixed disk connected to the system. F1:Help ESC: Exit ↑↓ : Select Item -/+: Change Value →←: Select Menu Enter: Select SubMenu F5: Setup Defaults F10: Save and Exit The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Landing Zone and Sector). These values are not user-configurable. These items show 0 if no SATA device is installed in the system. Only SATA 1-4 connectors support IDE mode. If you want to use SATA 5-6 connectors, set the SATA Operation Mode item to [AHCI] or [RAID]. Refer to page 4-28 for more details. Extended IDE Drive [Auto] Selects the type of fixed disk connected to the system. Configuration options: [None] [Auto] Access Mode [Auto] Sets the sector addressing mode. Configuration options: [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. 4-16 Chapter 4: BIOS setup