Asus M4A77D User Manual - Page 53

2.4.3 Chipset NorthBridge Configuration Memory Configuration Bank Interleaving [Auto] Allows you to enable the bank memory interleaving. Configuration options: [Disabled] [Auto] Channel Interleaving [XOR of Address bit] Allows you to enable the channel memory interleaving. Configuration options: [Disabled] [Address bits 6] [Address bits 12] [XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]] Enable Clock to All DIMMs [Disabled] Enables unused Clocks to DIMMs even though memory slots are not populated. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ATLVID [Disabled] Enables or disables MemClk Tri-Stating during C3 and Alt VID. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Enables or disables memory remapping around memory hole. Configuration options: [Disabled] [Enabled] DCT Unganged Mode [Always] Enables or disables the unganged DRAM mode (64-bit width). Configuration options: [Auto] [Always] Power Down Enable [Disabled] Enables or disables the DDR power down mode. Configuration options: [Disabled] [Enabled] ECC Configuration ECC Mode [Disabled] Enables or disables the DRAM ECC that allows the hardware to report and correct memory errors automatically. Configuration options: [Disabled] [Basic] [Good] [Super] [Max] [User] Primary Display Adapter [GFX-GPP-PCI] Allows you to set the primary display adapter. Configuration options: [GFX-GPP-PCI] [GPPGFX-PCI] [PCI-GFX-GPP] GFX: primary display adapter on the PCIe x16_1 slot GPP: primary display adapter on the PCIe x16_2 or PCIe x1 slot PCI: primary display adapter on the PCI slot ASUS M4A77D 2-13