Asus M4A77T SI M4A77T user's manual - Page 46
Asus M4A77T SI Manual
View all Asus M4A77T SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-Sector Transfer) M [Auto] Enables or disables data multi-sectors transfers. When this item is set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multisector transfer feature. When this item is set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 2.3.4 The SATA Configuration menu allows you to configure your storage devices. Select an item then press to display the submenu. SATA Configuration OnChip SATA Channel [Enabled] Enables or disables OnChip SATA Channel. Configuration options: [Disabled] [Enabled] The following two items only appear when you set OnChip SATA Channel to [Enabled]. SATA Port1 - Port4 [IDE] SATA Port5 - Port6 [IDE] Configures SATA 1/2/3/4. Configuration options: [IDE] [RAID] [AHCI] Configures SATA 5/6. Configuration options: [IDE] [RAID] [AHCI] • When SATA 1/2/3/4 are configured as [IDE], SATA 5/6 can only be configured as [IDE]. • When SATA 1/2/3/4/5/6 are configured as [AHCI], only SATA 1/2/3/4 can be detected under OS. Ensure to install the AHCI driver, so that you can use SATA 1/2/3/4/5/6 in AHCI mode under OS. • When SATA 1/2/3/4 are configured as [AHCI] and SATA 5/6 are configured as [IDE], you can access the devices on SATA 5/6 before entering OS. 2-8 Chapter 2: BIOS information