Home » Asus Manuals » Motherboards » Asus M4A88T-M LE » Manual Viewer

Asus M4A88T-M LE User Manual - Page 65

USB Conﬁguration

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

2.5.5 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB Functions [Enabled] Enables or disables the USB functions. Configuration options: [Disabled] [Enabled] Legacy USB Support [Auto] Enables or disables support for Legacy USB storage devices including USB flash drives and USB hard drives. Setting this item to [Auto] allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Configures the USB 2.0 controller in HiSpeed (480Mbps) mode or FullSpeed (12Mbps) mode. Configuration options: [FullSpeed] [HiSpeed] The following items only appear when a USB storage device is plugged in. USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Sets the maximum time that the BIOS waits for the USB storage device to initialize. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec] Emulation Type [Auto] Allows you to set the emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] ASUS M4A88T-M LE 2-23

Section	Page
Notices	6
Safety information	7
About this guide	7
M4A88T-M LE specifications summary	9
Chapter 1	13
Product introduction	13
1.1 Welcome!	13
1.2 Package contents	13
1.3 Special features	13
1.3.1 Product highlights	13
1.3.2 Innovative ASUS features	15
1.4 Before you proceed	17
1.5 Motherboard overview	18
1.5.1 Placement direction	18
1.5.2 Screw holes	18
1.5.3 Motherboard layout	19
1.5.4 Layout contents	19
1.6 Central Processing Unit (CPU)	20
1.6.1 Installing the CPU	20
1.6.2 Installing the heatsink and fan	22
1.7 System memory	23
1.7.1 Overview	23
1.7.2 Memory configurations	24
1.7.3 Installing a DIMM	29
1.7.4 Removing a DIMM	29
1.8 Expansion slots	30
1.8.1 Installing an expansion card	30
1.8.2 Configuring an expansion card	30
1.8.3 PCI slot	30
1.8.4 PCI Express x1 slots	30
1.8.5 PCI Express x16 slot	30
1.9 Jumpers	31
1.10 Connectors	32
1.10.1 Rear panel ports	32
1.10.2 Internal connectors	34
1.11 Software support	41
1.11.1 Installing an operating system	41
1.11.2 Support DVD information	41
Chapter 2	43
BIOS information	43
2.1 Managing and updating your BIOS	43
2.1.1 ASUS Update utility	43
2.1.2 ASUS EZ Flash 2	44
2.1.3 ASUS CrashFree BIOS 3	45
2.1.4 ASUS BIOS Updater	46
2.2 BIOS setup program	49
2.2.1 BIOS menu screen	50
2.2.2 Menu bar	50
2.2.3 Navigation keys	50
2.2.4 Menu items	51
2.2.5 Submenu items	51
2.2.6 Configuration fields	51
2.2.7 Pop-up window	51
2.2.8 Scroll bar	51
2.2.9 General help	51
2.3 Main menu	52
2.3.1 System Time	52
2.3.2 System Date	52
2.3.3 Primary IDE Master/Slave, SATA 1~6	52
2.3.4 SATA Configuration	53
2.3.5 System Information	54
2.4 Ai Tweaker menu	55
2.4.1 CPU OverClocking	56
2.4.2 CPU Ratio	57
2.4.3 DRAM Frequency	57
2.4.4 CPU/NB Frequency	57
2.4.5 HT Link Speed	57
2.4.6 GPU OverClocking	57
2.4.7 DRAM Timing Configuration	58
2.4.8 DRAM Driving Configuration	59
2.4.9 CPU & NB Voltage Mode	59
2.4.10 CPU VDDA Voltage	60
2.4.11 DRAM Voltage	60
2.4.12 HT Voltage	60
2.4.13 NB Voltage	60
2.4.14 NB 1.8V Voltage	60
2.4.15 SB Voltage	60
2.4.16 CPU Load-Line Calibration	60
2.4.17 CPU/NB Load-Line Calibration	60
2.4.18 PCI/PCIe CLK Status	60
2.5 Advanced menu	61
2.5.1 CPU Configuration	61
2.5.2 Chipset	62
2.5.3 Onboard Devices Configuration	64
2.5.4 PCIPnP	64
2.5.5 USB Configuration	65
2.6 Power menu	66
2.6.1 Suspend Mode	66
2.6.2 ACPI 2.0 Support	66
2.6.3 ACPI APIC Support	66
2.6.4 APM Configuration	66
2.6.5 HW Monitor Configuration	67
2.6.6 Anti Surge Support	67
2.7 Boot menu	68
2.7.1 Boot Device Priority	68
2.7.2 Boot Settings Configuration	68
2.7.3 Security	69
2.8 Tools menu	70
2.8.1 ASUS EZ Flash 2	70
2.8.2 ASUS O.C. Profile	71
2.8.3 AI NET 2	71

Match case Limit results 1 per page

ASUS M4A88T-M LE

2-23

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows

None

The following items only appear when a USB storage device is plugged in.

2.5.5

USB Conﬁguration

The items in this menu allows you to change the USB-related features. Select an item then

press

<Enter>

to display the conﬁguration options.

USB Mass Storage Device Conﬁguration

USB Mass Storage Reset Delay [20 Sec]

Sets the maximum time that the BIOS waits for the USB storage device to initialize.

Conﬁguration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Conﬁguration options: [Auto] [Floppy]

[Forced FDD] [Hard Disk] [CDROM]

USB Functions [Enabled]

Enables or disables the USB functions. Conﬁguration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Enables or disables support for Legacy USB storage devices including USB ﬂash drives and

USB hard drives. Setting this item to

[Auto]

allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Conﬁguration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller Mode [HiSpeed]

Conﬁgures the USB 2.0 controller in HiSpeed (480Mbps) mode or FullSpeed (12Mbps)

mode. Conﬁguration options: [FullSpeed] [HiSpeed]