Asus M5A97 User Manual - Page 72

SB HD Azalia Configuration Allows you to change the HD Azalia configuration. [Enabled] [Disabled] Enables the High Definition Audio Azalia device. Disables the device. The following two items appear only when you set the HD Audio Azalia Device item to [Enabled]. Azalia Front Panel [HD] Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC'97 or highdefinition audio depending on the audio standard that the front panel audio module supports. [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. 3.5.7 APM UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced\ APM > ErP Ready Advanced Monitor Enabled Boot Tool Allow BIOS to switch off some power at S5 to get the system ready for Eup requirement. When set to Enabled, all other PME options will be switched off. ErP Ready [Enabled] Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement. When this item is set to [Enabled], all other PME options will be switched off. Configuration options: [Enabled] [Disabled] The following items appear only when you set the ErP Ready to [Disabled]. Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss. Power On By PS/2 Device [Disabled] Allows you to use PS/2 device to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] Chapter 3 3-20 Chapter 3: BIOS setup