Asus MAXIMUS FORMULA SPECIAL Motherboard Installation Guide - Page 65
Installing Fusion Block System accessory
View all Asus MAXIMUS FORMULA SPECIAL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2.8.4 Installing Fusion Block System accessory Install your watercooling system to the motherboard using the bundled accessories to obtain the best thermal solution. Package contents 3/8" ID tubes x 2 1/2" to 3/8" ID fittings x 2 10mm to 3/8" ID fittings x 2 1/2" ID tube clips x 2 3/8" ID tube clips x 6 For watercooling system with 3/8" ID tubes 1. Firmly press a tube clip and fit the tube into the clip. 2. Press the clip and connect the tube to the waterblock. When done, release the clip to tighten the two together. 3. Repeat Step 1 and 2 for another tube. Make sure that both tubes are well connected to prevent leak, and then fill the coolant into the reservoir. 1 2 ROG Maximus Formula (Special Edition) / Maximus Formula 2-39
ROG Maximus Formula (Special Edition) / Maximus Formula
2-39
2.8.4
Installing Fusion Block System accessory
Install your watercooling system to the motherboard using the bundled accessories
to obtain the best thermal solution.
Package contents
1
2
For watercooling system with 3/8” ID tubes
1.
Firmly press a tube clip and fit the tube into the clip.
2.
Press the clip and connect the tube to the waterblock. When done, release
the clip to tighten the two together.
3.
Repeat Step 1 and 2 for another tube. Make sure that both tubes are well
connected to prevent leak, and then fill the coolant into the reservoir.
3/8” ID tubes x 2
1/2” to 3/8” ID fittings x 2
10mm to 3/8” ID fittings x 2
1/2” ID tube clips x 2
3/8” ID tube clips x 6