Asus MAXIMUS VIII GENE User Guide

Asus MAXIMUS VIII GENE Manual

Asus MAXIMUS VIII GENE manual content summary:

  • Asus MAXIMUS VIII GENE | User Guide - Page 1
    Motherboard MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 2
    data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to
  • Asus MAXIMUS VIII GENE | User Guide - Page 3
    Contents Safety information...vi About this guide...vii MAXIMUS VIII GENE specifications summary ix Package contents...xiii Installation tools and components xiv Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 ROG Gaming Features 1-3 1.1.3 ROG
  • Asus MAXIMUS VIII GENE | User Guide - Page 4
    3.8 Boot menu 3-41 3.9 Tool menu 3-46 3.9.1 ASUS EZ Flash 3 Utility 3-46 3.9.2 Secure Erase 3-46 3.9.3 ASUS Overclocking Profile 3-48 3.9.4 ROG OC Panel H-Key Configure 3-49 3.9.5 ASUS SPD Information 3-50 3.9.6 Graphics Card Information 3-50 3.10 Exit menu 3-51 3.11 Updating BIOS 3-52 iv
  • Asus MAXIMUS VIII GENE | User Guide - Page 5
    4.13 ROG CPU-Z 4-50 4.14 RAMCache 4-51 Chapter 5: RAID Support 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting the RAID item in BIOS 5-2 5.1.4 Intel® Rapid Storage Technology Option ROM utility 5-3 5.2 Creating a RAID driver disk
  • Asus MAXIMUS VIII GENE | User Guide - Page 6
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vi
  • Asus MAXIMUS VIII GENE | User Guide - Page 7
    comes with the motherboard package and the software. • Chapter 5: RAID Support This chapter describes the RAID configurations. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS website The ASUS website (www.asus.com
  • Asus MAXIMUS VIII GENE | User Guide - Page 8
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus MAXIMUS VIII GENE | User Guide - Page 9
    MAXIMUS VIII GENE specifications summary CPU Chipset Memory Expansion slots Graphic Multi-GPU support Storage LAN LGA1151 socket for 6th Generation Intel® Core™ i7 / i5 / i3 / Pentium® / Celeron® Processors Supports 14nm CPU Supports Intel® Turbo Boost Technology 2.0* * The support of these
  • Asus MAXIMUS VIII GENE | User Guide - Page 10
    MAXIMUS VIII GENE specifications summary Audio USB ROG Exclusive Intel® Z170 Express Chipset - Supports ASUS USB 3.1 Boost: - 8 x USB 3.0 ports (2 ports at mid-board; 6 ports at back panel) - 4 x USB 2.0 ports at mid-board* ASMedia® USB 3.1 controller - Supports ASUS USB 3.1 Boost: - 2 x USB
  • Asus MAXIMUS VIII GENE | User Guide - Page 11
    MAXIMUS VIII GENE specifications summary Special Features Back I/O Ports ASUS Dual Intelligent Processors 5 - 5-Way Optimization tuning key perfectly consolidates TPU, EPU, DIGI+ Power Control, Fan Xpert 3, and Turbo App ASUS Exclusive Features - AI Suite 3 - USB 3.1 Boost - AI Charger+ - Push
  • Asus MAXIMUS VIII GENE | User Guide - Page 12
    MAXIMUS VIII GENE specifications summary Internal Connectors BIOS Features Manageability Software 1 x USB 3.0 header support additional 2 USB 3.0 ports 2 x USB 2.0 connectors support additional 4 USB 2.0 ports [one connector via ROG_EXT header] 2 x SATA Express connectors 2 x SATA 6Gb/s
  • Asus MAXIMUS VIII GENE | User Guide - Page 13
    Accessories Application DVD Documentation ROG MAXIMUS VIII GENE 2 x 2-in-1 SATA 6 Gb/s cables 1 x SLI™ bridge 1 x I/O Shield 1 x Q-Connector kit 1 x ROG Door Hanger 1 x 12-in-1 ROG cable label 1 x CPU Installation Tool 1x Fan Label 1 x M.2 Screw ROG motherboard support DVD User guide If any of the
  • Asus MAXIMUS VIII GENE | User Guide - Page 14
    Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit Intel LGA 1151 CPU Intel LGA 1151 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table
  • Asus MAXIMUS VIII GENE | User Guide - Page 15
    . SLI®/CrossFire™ On-Demand This motherboard supports multi-GPU SLI®/CrossFireX™ graphics cards for an unrivalled gaming performance. With the Intel® Z170 platform to optimize the PCIe allocation of multiple GPUs, it supports up to 2-WAY GPU SLI® or CrossFireX™ configuration. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 16
    disable those ports when an M.2 card is inserted. Supports 2242 (22 mm x 42 mm), 2260 (22 mm x 60 mm), 2280 (22 mm x 80 mm), and 22110 (22 mm x 110 mm) SSD cards. Complete USB 3.0 integration This motherboard offers you the strategic USB 3.0 accessibility for both the front and rear panels
  • Asus MAXIMUS VIII GENE | User Guide - Page 17
    the motherboard that CPU utilization for a smooth networking experience. It has advanced features including advanced interrupt-handling, low-power consumption, and Intel Stable Image Platform Program (SIPP) support thanks to its compatibility with the Intel CPU and chipset. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 18
    high-speed RAM performance while accessing them. Plus, this extends SSD lifespan and CPU Level UP, XMP, or directly to BIOS mode. This feature supports USB keyboards only. 1.1.4 ASUS Special Features AI Suite 3 With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS
  • Asus MAXIMUS VIII GENE | User Guide - Page 19
    a USB storage device containing the BIOS file, press the BIOS Flashback button for about three seconds, and the UEFI BIOS is automatically updated even without entering the existing BIOS or operating system. It also allows you to regularly check for UEFI BIOS updates, and download the latest BIOS
  • Asus MAXIMUS VIII GENE | User Guide - Page 20
    note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power
  • Asus MAXIMUS VIII GENE | User Guide - Page 21
    1.2.2 Motherboard layout Chapter 1 Refer to Internal connectors and Rear I/O connection for more information about rear panel connectors and internal connectors. ASUS MAXIMUS VIII GENE 1-7
  • Asus MAXIMUS VIII GENE | User Guide - Page 22
    LGA1151 CPU Socket 3. CPU, water pump, CPU optional, extension, and chassis fan connectors (4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-4) 4. DDR4 DIMM slots 5. ProbeIt 6. Q_Code LEDs 7. MemOK! button 8. USB 3.0 connectors (20-1 pin USB3_12) 9. Intel® Z170 Serial ATA
  • Asus MAXIMUS VIII GENE | User Guide - Page 23
    Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. ASUS MAXIMUS VIII GENE 1-9
  • Asus MAXIMUS VIII GENE | User Guide - Page 24
    Chapter 1 1.2.4 System memory The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO
  • Asus MAXIMUS VIII GENE | User Guide - Page 25
    operate at the vendor-marked or at a higher frequency, refer to section 3.5 Extreme Tweaker menu for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. ASUS MAXIMUS VIII GENE 1-11
  • Asus MAXIMUS VIII GENE | User Guide - Page 26
    Chapter 1 MAXIMUS VIII GENE Motherboard Qualified Vendors Lists (QVL) DDR4 3600+ MHz capability 39 - 17-18-18-38 - 17-18-18-38 - 17-18-18-38 - 17-18-18-38 Voltage DIMM socket support (Optional) 24 1.35V • • 1.35V • 1.35V • 1.35V • • 1.35V • • DDR4 3466 MHz capability Vendors
  • Asus MAXIMUS VIII GENE | User Guide - Page 27
    - 16-18-18-36 - 16-16-16-36 - 16-16-16-36 Voltage DIMM socket support (Optional) 24 1.35V • • 1.35V • • 1.35V • 1.35V • • 1.35V • support (Optional) 24 1.35V • • 1.35V • • 1.35V • 1.35V • • 1.35V • • 1.35V • • 1.35V • • 1.35V • • ASUS MAXIMUS VIII GENE 1-13
  • Asus MAXIMUS VIII GENE | User Guide - Page 28
    - (XMP) 8GB ) Kingston HX428C14PBK4/16 16GB ( 4x SS - - (XMP) 4GB ) Panram PUD42800C164G4NJW 16GB ( 4x SS - - (XMP) 4GB ) Timing 17-17-17-36 Voltage 1.2 DIMM socket support (Optional) 124 ••• 15-15-15-36 1.2 17-17-17-36 17-17-17-36 15-15-15-35 1.35 16-16-16-36 1.2 ••• 16-18
  • Asus MAXIMUS VIII GENE | User Guide - Page 29
    1.2 DIMM socket support (Optional) 124 • • 1.2 • • 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 • • 1.2 ••• 1.2 ••• 1.2 ••• ASUS MAXIMUS VIII GENE 1-15
  • Asus MAXIMUS VIII GENE | User Guide - Page 30
    K4A4G085WD Samsung K4A4G085WD V-color DW3J0460HM Timing 16-16-16-39 Voltage 1.2 DIMM socket support (Optional) 124 ••• 14-16-16-31 1.2 ••• 14-16-16-31 35 15-15-15-36 13-15-15-28 Voltage 1.2 1.2 1.2 1.2 1.2 DIMM socket support (Optional) 124 ••• ••• ••• ••• ••• ••• •• 13-15-15-28 1.2 ••• 13
  • Asus MAXIMUS VIII GENE | User Guide - Page 31
    configuration. • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS MAXIMUS VIII GENE 1-17
  • Asus MAXIMUS VIII GENE | User Guide - Page 32
    slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. 1 2 3 Slot Description PCIe 3.0 x16/x8_1 slot PCIe 3.0 x8_2 slot PCIe 3.0 x4_1 slot 1-18 Chapter 1: Product Introduction
  • Asus MAXIMUS VIII GENE | User Guide - Page 33
    fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment. • New 6th generation Intel® Core™ processors support PCIe 3.0 speed rate. PCIe_x16/x8_1 slot switches to x8 mode when PCIe_x8_2 slot is occupied. ASUS MAXIMUS VIII GENE 1-19
  • Asus MAXIMUS VIII GENE | User Guide - Page 34
    a bare or opencase system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on button (START) The motherboard comes with a power-on button that allows you to power up or wake up the system. The button also lights up when the system is
  • Asus MAXIMUS VIII GENE | User Guide - Page 35
    to reboot into the BIOS safe mode. This button temporarily applies safe settings to the BIOS while retaining any overclocked settings allowing you to modify the settings causing boot failure. Use this button when overclocking or tweaking the settings of your system. ASUS MAXIMUS VIII GENE 1-21
  • Asus MAXIMUS VIII GENE | User Guide - Page 36
    Memory QVL (Qualified Vendors Lists) in this user manual or at www.asus.com. • If you BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus
  • Asus MAXIMUS VIII GENE | User Guide - Page 37
    (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED flashes until the problem is solved. This user-friendly design provides an intuitive way to locate the root problem within seconds. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 38
    Chapter 1 3. PCH_LED (PCH_LED1-3) The PCH_LED is designed to indicate the PCH voltage and PCH PLL voltage. 4. Q-Code LED The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the following page for details. 1-24 Chapter 1:
  • Asus MAXIMUS VIII GENE | User Guide - Page 39
    type or incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed (continued on the next page) ASUS MAXIMUS VIII GENE 1-25
  • Asus MAXIMUS VIII GENE | User Guide - Page 40
    EA EB EC - EF Description PEI Core is started Pre-memory CPU initialization is started Pre-memory System Agent initialization is started Pre-memory CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU
  • Asus MAXIMUS VIII GENE | User Guide - Page 41
    initialization Installation of the PCH Runtime Services CPU DXE initialization is started PCI Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources (continued on the next page) ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 42
    ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug (continued on the next page) 1-28 Chapter 1: Product
  • Asus MAXIMUS VIII GENE | User Guide - Page 43
    reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error PCH initialization error error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ACPI/ASL Checkpoints ASUS MAXIMUS VIII GENE 1-29
  • Asus MAXIMUS VIII GENE | User Guide - Page 44
    1.2.8 Jumper 1. LN2 Mode jumper (3-pin LN2_MODE) With LN2 mode activated, the ROG motherboard is optimized to remedy the cold-boot bug during POST and help the system boot successfully. Chapter 1 1-30 Chapter 1: Product Introduction
  • Asus MAXIMUS VIII GENE | User Guide - Page 45
    10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z170 chipset. Chapter 1 manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section PCH Storage Configuration for details. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 46
    devices, optimized power efficiency, and backward compatibility with USB 2.0. The USB 3.0 module is purchased separately. • These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 3.0 ports under Windows® 7, Windows® 8, and Windows
  • Asus MAXIMUS VIII GENE | User Guide - Page 47
    connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. 1 x USB 2.0 ports (USB1314) at mid-board shares with ROG extension (ROG_EXT) port. ASUS MAXIMUS VIII GENE 1-33
  • Asus MAXIMUS VIII GENE | User Guide - Page 48
    Chapter 1 4. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector. We recommend that you connect a high-definition front panel
  • Asus MAXIMUS VIII GENE | User Guide - Page 49
    the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector. The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. ASUS MAXIMUS VIII GENE 1-35
  • Asus MAXIMUS VIII GENE | User Guide - Page 50
    , we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for
  • Asus MAXIMUS VIII GENE | User Guide - Page 51
    supports ATX power BIOS settings. Pressing the power button for more than four seconds while the system is ON turns the system OFF. • Reset button (3-pin RESET) This 3-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 52
    connector is for the OC Panel, Front Base, and the other ROG device. • The OC Panel and Front Base are purchased separately. • Visit www.asus.com for more information about the OC Panel and Front Base. 9. T_Sensor connector (2-pin T_SENSOR1) This connector is for the thermistor cable that allows you
  • Asus MAXIMUS VIII GENE | User Guide - Page 53
    Chapter 1 10. M.2 (Socket 3) The M.2 (Socket 3) with M Key supports type 2242 (22mm x 42mm), 2260 (22mm x 60mm), 2280 (22mm x 80mm), and 22110 (22mm x 110mm) PCIe/ points even during overclocking. See the illustration below to locate the respective ProbeIt points. ASUS MAXIMUS VIII GENE 1-39
  • Asus MAXIMUS VIII GENE | User Guide - Page 54
    Chapter 1 1-40 Chapter 1: Product Introduction
  • Asus MAXIMUS VIII GENE | User Guide - Page 55
    may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ASUS MAXIMUS VIII GENE 2-1
  • Asus MAXIMUS VIII GENE | User Guide - Page 56
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 57
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket. Chapter 2 Top of CPU Bottom of CPU Bottom of CPU ASUS MAXIMUS VIII GENE 2-3
  • Asus MAXIMUS VIII GENE | User Guide - Page 58
    it onto the CPU socket on the motherboard. • Use the CPU Installation Tool for installing the CPU only. DO NOT damage or bend the CPU Installation Tool. • Always firmly hold both sides of the CPU Installation Tool when installing, removing, or picking up the CPU Installation Tool. • ASUS will not
  • Asus MAXIMUS VIII GENE | User Guide - Page 59
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 ASUS MAXIMUS VIII GENE 2-5
  • Asus MAXIMUS VIII GENE | User Guide - Page 60
    To uninstall the CPU heatsink and fan assembly Chapter 2 2-6 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 61
    2.1.4 DIMM installation Chapter 2 To remove a DIMM ASUS MAXIMUS VIII GENE 2-7
  • Asus MAXIMUS VIII GENE | User Guide - Page 62
    2.1.5 ATX Power connection Chapter 2 OR OR 2-8 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 63
    2.1.6 SATA device connection OR OR Chapter 2 ASUS MAXIMUS VIII GENE 2-9
  • Asus MAXIMUS VIII GENE | User Guide - Page 64
    2.1.7 Front I/O Connector To install ASUS Q-Connector Chapter 2 To install USB 2.0 connector To install front panel audio connector USB 2.0 To install USB 3.0 connector USB 3.0 2-10 AAFP Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 65
    2.1.8 Expansion Card installation To install PCIe x16 cards Chapter 2 ASUS MAXIMUS VIII GENE 2-11
  • Asus MAXIMUS VIII GENE | User Guide - Page 66
    storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically. To use USB BIOS Flashback: 1. Download the latest BIOS file from the ASUS website. 2. Extract and rename the BIOS image file to M8G.CAP. 3. Copy M8G.CAP to the root directory
  • Asus MAXIMUS VIII GENE | User Guide - Page 67
    Intel® USB 3.0 ports 3 and 4. Lower port supports the KeyBot II feature, and upper port support USB BIOS Flashback function. 12. Optical S/PDIF OUT port 13. Audio I/O ports** * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ASUS MAXIMUS VIII GENE 2-13
  • Asus MAXIMUS VIII GENE | User Guide - Page 68
    3.0 devices. • Due to the design of the Intel chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. * LAN ports LED indications Activity Link LED Status Description
  • Asus MAXIMUS VIII GENE | User Guide - Page 69
    Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 ASUS MAXIMUS VIII GENE 2-15
  • Asus MAXIMUS VIII GENE | User Guide - Page 70
    Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-16 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 71
    ATX power supplies, the system LED lights up when you press the ATX to enter the BIOS Setup. Follow the instructions in Chapter 3. BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ASUS MAXIMUS VIII GENE 2-
  • Asus MAXIMUS VIII GENE | User Guide - Page 72
    Chapter 2 2-18 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII GENE | User Guide - Page 73
    Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as M8G.CAP for this motherboard. Chapter 3 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 74
    , try to clear the CMOS and reset the motherboard to the default value. See section Rear I/O connection for location of the Clear CMOS button to erase RTC RAM. • The BIOS setup program does not support the bluetooth devices. BIOS menu screen The BIOS Setup program can be used under two modes: EZ
  • Asus MAXIMUS VIII GENE | User Guide - Page 75
    BIOS setup program Creates storage RAID and configures system overclocking Chapter 3 Enables or disables the Intel Rapid Storage Technology Displays the CPU Fan's speed. Click the button to manually options vary depending on the devices you installed to the system. ASUS MAXIMUS VIII GENE 3-3
  • Asus MAXIMUS VIII GENE | User Guide - Page 76
    The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to Go back to EZ Mode Search on the FAQ Displays the CPU temperature, CPU, and memory voltage output 3-4 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 77
    to manually tweak the fans to your desired settings. EZ Tuning Wizard(F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA mode from AHCI to RAID mode. Chapter 3 ASUS MAXIMUS VIII GENE 3-5
  • Asus MAXIMUS VIII GENE | User Guide - Page 78
    to key in notes of the activities that you have done in BIOS. • The quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • select it and press to display a list of options. Last Modified button This button shows the items that you last modified
  • Asus MAXIMUS VIII GENE | User Guide - Page 79
    can personalize this screen by adding or removing items. Adding items to My Favorites To add frequently-used BIOS items to My Favorites: 1. Press on your keyboard or click to open Setup Tree Map Map screen. 4. Go to My Favorites menu to view the saved BIOS items. ASUS MAXIMUS VIII GENE 3-7
  • Asus MAXIMUS VIII GENE | User Guide - Page 80
    3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Chapter 3 3-8 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 81
    the BIOS password. See section 2.3.1 Rear I/O connection for location of the Clear CMOS button to clear RTC RAM. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS MAXIMUS VIII GENE 3-9
  • Asus MAXIMUS VIII GENE | User Guide - Page 82
    that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in
  • Asus MAXIMUS VIII GENE | User Guide - Page 83
    (X.M.P.) Technology, choose this item to set the profiles supported by your memory modules for optimizing the system performance. The [X.M.P.] configuration option appears only when you install memory modules supporting the eXtreme Memory Profile(X.M.P.) Technology. ASUS MAXIMUS VIII GENE 3-11
  • Asus MAXIMUS VIII GENE | User Guide - Page 84
    supported by the installed memory module is displayed. ASUS apply the CPU default Turbo Ratio setting or manually assign a apply the CPU default Turbo Ratio setting or manually assign apply the CPU default Turbo Ratio setting or manually assign the CPU default Turbo Ratio setting or manually assign
  • Asus MAXIMUS VIII GENE | User Guide - Page 85
    key. Misc. MRC Fast Boot [Auto] Allows you to enable, disable or automatically set the MRC fast boot. Configuration options: [Auto] [Enabled] [Disabled] Chapter 3 ASUS MAXIMUS VIII GENE 3-13
  • Asus MAXIMUS VIII GENE | User Guide - Page 86
    or disable memory scrambler support. Configuration options: [ CPU Load-line Calibration [Auto] Load-line is defined by Intel® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU CPU and VRM thermal conditions. Select from levels 1 to 7 to adjust the CPU
  • Asus MAXIMUS VIII GENE | User Guide - Page 87
    support. CPU VRM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual . Chapter 3 ASUS MAXIMUS VIII GENE 3-15
  • Asus MAXIMUS VIII GENE | User Guide - Page 88
    options: [Auto] [0.7000] - [1.8000] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) [Enabled] Allows the operating system to items appear only when you set the Turbo Mode to [Enabled]. Chapter 3 3-16 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 89
    22] [-0.34] [-0.46] [+0.12] [+0.22] [+0.28] [+0.38] [+0.17] BCLK Frequency Slew Rate This item allows you to set frequency update rate. Lower values speed up clock changes. Configuration options: [Auto] [Disable] [32us/MHz] [64us/MHz] [128us/MHz] [512us/ MHz] Chapter 3 ASUS MAXIMUS VIII GENE 3-17
  • Asus MAXIMUS VIII GENE | User Guide - Page 90
    . Use the and keys to adjust the value. Configuration options: [Auto] [8] - [33] Max. CPU Graphics Ratio [Auto] This item allows you to set the CPU graphics ratio. Use the and keys to adjust the value. Configuration options: [Auto] [8] - [26] Chapter 3 3-18 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 91
    : [Auto] [0.001] - [0.999] DRAM Voltage [Auto] Configuration options: [Auto] [1.0032] - [2.0064] CPU VCCIO Voltage [Auto] Configuration options: [Auto] [0.70000] - [1.80000] CPU System Agent Voltage [Auto] Configuration options: [Auto] [0.70000] - [1.80000] Chapter 3 ASUS MAXIMUS VIII GENE 3-19
  • Asus MAXIMUS VIII GENE | User Guide - Page 92
    items appear only when you set the CPU Graphics Voltage Mode to [Manual Mode]. CPU Graphics Voltage Override [Auto] Allows you to configure the CPU Graphics Voltage. Configuration options: [Auto] DRAM Data REF Voltage. Configuration options: [Auto] [0] - [63] Chapter 3 3-20 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 93
    3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 ASUS MAXIMUS VIII GENE 3-21
  • Asus MAXIMUS VIII GENE | User Guide - Page 94
    that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 Active Processor Cores [All] This item allows you to select the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] Intel Virtualization
  • Asus MAXIMUS VIII GENE | User Guide - Page 95
    Limit [Auto] This item allows you to set the a C-state limit for the CPU package. Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [Auto] CFG Lock [Disabled] This item allows you to disable or enable the CFG Lock. Configuration options: [Enabled] [Disabled] ASUS MAXIMUS VIII GENE 3-23
  • Asus MAXIMUS VIII GENE | User Guide - Page 96
    for the Windows Vista operating system to control the Active State Power Management (ASPM) support for devices. [Enabled] Vista controls the ASPM support for the device. [Disabled] BIOS controls the ASPM support for the device. PCH - PCI Express DMI Link ASPM Control [Disabled] This item is
  • Asus MAXIMUS VIII GENE | User Guide - Page 97
    ASPM Support [Disabled] Select the ASPM level for energy saving conditions. Configuration options: [Disabled] [L0s] [L1s] [L0sL1] [Auto] SA - PCI State Power Management for the PEG 0. Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1] Chapter 3 ASUS MAXIMUS VIII GENE 3-25
  • Asus MAXIMUS VIII GENE | User Guide - Page 98
    ] [Disabled] DMI/OPI Configuration Allows you to configure the DMI/OPI settings. DMI Max Link Speed [Auto] Configuration options: [Auto] [Gen1] [Gen2] [Gen3] 3-26 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 99
    S5(Soft off) states, but not light up at the S4/S5 state when the "ErP Ready" is enabled. [Disabled] LEDs will not light up. ASUS MAXIMUS VIII GENE 3-27
  • Asus MAXIMUS VIII GENE | User Guide - Page 100
    to [Gen2], the PCI-E port runs at PCI-E 2.0 speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen 3] 3.6.6 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding
  • Asus MAXIMUS VIII GENE | User Guide - Page 101
    onboard storage driver to Support [Disabled] This item is designed for LPM (link power management) support with a better energy saving conditions. When set to [Enabled], the hot plug function of SATA ports are disabled. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 102
    device is detected, the item shows None. Legacy USB Support [Enabled] [Disabled] The USB devices can be used only for the BIOS setup program. It cannot be recognized in boot devices list. [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Auto] Allows the system
  • Asus MAXIMUS VIII GENE | User Guide - Page 103
    or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. 3.6.8 Network Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE boot option. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 104
    Charging Support. Configuration options: [Disabled] [Enabled] USB Type C Power Switch [Auto] [Auto] The system will automatically detect your USB Type C devices and provide suitable power if needed. [Enabled] The USB Type C port will always provide power to your devices. 3-32 Chapter 3: BIOS
  • Asus MAXIMUS VIII GENE | User Guide - Page 105
    ]. Intel LAN PXE Option ROM [Disabled] This item appears only when Intel LAN Controller is set to [Enabled].This item allows you to enable or disable the Intel LAN preboot execution environment (PXE) option ROM. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS MAXIMUS VIII GENE 3-33
  • Asus MAXIMUS VIII GENE | User Guide - Page 106
    By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] Generates a wake event and configure the real-time clock (RTC) alarm date. 3-34 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 107
    3.6.11 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. Chapter 3 ASUS MAXIMUS VIII GENE 3-35
  • Asus MAXIMUS VIII GENE | User Guide - Page 108
    and automatically switches the mode control. [PWM Mode] Enable the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan. [DC Mode] Enable the CPU Q-Fan control feature in DC mode for 3-pin CPU fan. [Disabled] Disable the Q-Fan control. CPU Fan Step Up [0 sec] This item allows you to set
  • Asus MAXIMUS VIII GENE | User Guide - Page 109
    temperature source. Configuration options: [CPU] [MotherBoard] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the other end to the component to get the temperature. Chapter 3 ASUS MAXIMUS VIII GENE 3-37
  • Asus MAXIMUS VIII GENE | User Guide - Page 110
    of the CPU fan item allows you to set the value of the CPU fan step down. Configuration options: [0 sec] [12 Manual] Sets to [Manual [Manual]. Chassis to 100%. When the CPU temperature reaches the upper limit to 100%. When the CPU temperature reaches the middle limit CPU temperature is under the limit
  • Asus MAXIMUS VIII GENE | User Guide - Page 111
    according to the selected temperature source. Configuration options: [CPU] [MotherBoard] [VRM] [PCH] [T_SENSOR1] [EXT_ Sensor1] 20% to 100%. When the CPU temperature reaches the middle limit, the Extension Fan 1-4 will operate at the middle duty cycle. Chapter 3 ASUS MAXIMUS VIII GENE 3-39
  • Asus MAXIMUS VIII GENE | User Guide - Page 112
    Fan 1-4 duty cycle. The values range from 0% to 100%. When the CPU temperature is under the limit, the Extension Fan 1-4 will operate at the minimum the Water Pump control in PWM mode for 4-pin chassis fan. Anti Surge Support [On] Enable this item for Over Voltage Protection (OVP) and Under Voltage
  • Asus MAXIMUS VIII GENE | User Guide - Page 113
    The Boot menu items allow you to change the system boot options. Scroll down to display the other BIOS items. Chapter 3 Fast Boot [Enabled] [Disabled] Allows your system to go back to its normal Accelerates the boot speed on the next boot after an AC power loss. ASUS MAXIMUS VIII GENE 3-41
  • Asus MAXIMUS VIII GENE | User Guide - Page 114
    a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time decoded in above 4G address space if your system supports 64-bit PCI Decoding. Configuration options: [Enabled during the POST. [Disabled] Only the ASUS logo will be shown during the POST
  • Asus MAXIMUS VIII GENE | User Guide - Page 115
    better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. [Disabled] Disable the CSM to fully support the non-UEFI driver add- ® nonUEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. Chapter 3 ASUS MAXIMUS VIII GENE 3-43
  • Asus MAXIMUS VIII GENE | User Guide - Page 116
    USB storage device. PK Management Set New Key This item allows you to load the downloaded PK from a USB New Key Allows you to load the downloaded KEK from a USB storage device. Append Key Allows you to Set New Key Allows you to load the downloaded db from a USB storage device. Append Key Allows you to
  • Asus MAXIMUS VIII GENE | User Guide - Page 117
    when the ASUS Logo appears. Boot Override These items displays the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device. Chapter 3 ASUS MAXIMUS VIII GENE 3-45
  • Asus MAXIMUS VIII GENE | User Guide - Page 118
    >, a confirmation message appears. Use the Left/Right arrow key to select between [by USB] or [by Internet], then press to confirm your choice. For more details, refer to section ASUS EZ Flash 3 utility. 3.9.2 Secure Erase SSD speeds may lower over time as with any storage medium due to data
  • Asus MAXIMUS VIII GENE | User Guide - Page 119
    . SSDs might be locked if the Secure Erase process is either incomplete or was stopped. This may be due to a third party software that uses a different password defined by ASUS. You have to unlock the SSD in the software before proceeding with Secure Erase. Chapter 3 ASUS MAXIMUS VIII GENE 3-47
  • Asus MAXIMUS VIII GENE | User Guide - Page 120
    3.9.3 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Profile Name Key in the profile name to save current BIOS settings to profile 1 to 8. Save to Profile Saves the current BIOS settings to profile number 1 to 8. Load/Save Profile from/to USB Drive Load/Save
  • Asus MAXIMUS VIII GENE | User Guide - Page 121
    This item allows you to save the new values of the CPU Core Voltage, VCCSA Voltage, BCLK Frequency, and CPU Ratio. Load from profile This item allows you to load the previous values of the CPU Core Voltage, VCCSA Voltage, BCLK Frequency, and CPU Ratio. Chapter 3 ASUS MAXIMUS VIII GENE 3-49
  • Asus MAXIMUS VIII GENE | User Guide - Page 122
    3.9.5 ASUS SPD Information Allows you to view the DRAM SPD information. DIMM slot number Allows you to select the DIMM slot number to installed in your system. Bus Interface This item allows you to select the bus interface. Configuration options: [PCIEX16/X8_1] [PCIEX8_2] 3-50 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 123
    the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Chapter 3 Load Optimized Defaults USB device This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices. ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 124
    version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system's failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.com to download the latest BIOS file for this motherboard. The following
  • Asus MAXIMUS VIII GENE | User Guide - Page 125
    that contains the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. ASUS MAXIMUS VIII GENE 3-53
  • Asus MAXIMUS VIII GENE | User Guide - Page 126
    file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save
  • Asus MAXIMUS VIII GENE | User Guide - Page 127
    shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • D ownload the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not supported under DOS environment. Ensure that your
  • Asus MAXIMUS VIII GENE | User Guide - Page 128
    Drives panel then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: MAXIMUS VIII GENE VER: 0210 (H :00 B :00) DATE: 02/05/2015 PATH: C:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C: FORMAN~1 D: M8G.CAP 8390626 2015-05-10 21:14:34
  • Asus MAXIMUS VIII GENE | User Guide - Page 129
    the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. Chapter 3 ASUS MAXIMUS VIII GENE 3-57
  • Asus MAXIMUS VIII GENE | User Guide - Page 130
    Chapter 3 3-58 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII GENE | User Guide - Page 131
    system. 2. Connect the USB ODD or USB storage device to your 100 series platform. 3. Insert the ASUS support DVD into a SATA ODD on your 100 series platform. 4. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot screen. Chapter 4 ASUS MAXIMUS VIII GENE 4-1
  • Asus MAXIMUS VIII GENE | User Guide - Page 132
    device. 6. The USB 3.0 driver will be loaded automatically during installation startup. Chapter 4 The "Setup is starting..." screen will show up if the USB 3.0 driver is loaded correctly. 7. Follow the onscreen instructions to complete the Windows® 7 installation. 4-2 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 133
    the ASUS supporting DVD USB 3.0 driver will be loaded automatically during installation startup. The "Setup is starting..." screen will show up if the USB 3.0 driver is loaded correctly. 9. Follow the onscreen instructions to complete the Windows® 7 installation. Chapter 4 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 134
    installation DVD • 1 x Working system (PC or notebook) • 1 x SATA ODD • 1 x USB storage device (8 GB or more) 1. Insert the Windows® 7 installation DVD. 2. Launch the ASUS EZ Installer located on the ASUS support DVD. 3. Select a method of creating a modified Windows® 7 installation file: • Windows
  • Asus MAXIMUS VIII GENE | User Guide - Page 135
    if the USB storage device is not displayed. - Click Yes to clear the contents on the USB storage device and create a bootable USB device. Make sure to backup contents on the USB storage device, as it will be formatted. - Once completed, click OK to finish. Chapter 4 ASUS MAXIMUS VIII GENE 4-5
  • Asus MAXIMUS VIII GENE | User Guide - Page 136
    • Windows® 7 OS disk to ISO file - Select Windows 7 OS disk to ISO file then click Next. - Check I agree and then click Next. - Select the source of the Windows® 7 installation disk then click Next. Chapter 4 4-6 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 137
    boot device. 7. The USB 3.0 driver will be loaded automatically during installation startup. The "Setup is starting..." screen will show up if the USB 3.0 driver is loaded correctly. 8. Follow the onscreen instructions to complete the Windows® 7 installation. Chapter 4 ASUS MAXIMUS VIII GENE 4-7
  • Asus MAXIMUS VIII GENE | User Guide - Page 138
    any time without notice. Visit www.asus.com for updates. 4.2.1 Running the support DVD Ensure that you have an Administrator account before running the support DVD in Windows® 7, Windows® 8, Windows® 8.1, or Windows® 10 OS. To run the support DVD: 1. Place the Support DVD into the optical drive
  • Asus MAXIMUS VIII GENE | User Guide - Page 139
    ® Acrobat® Reader from the Utilities tab before opening the files. To read about your motherboard's utility guide: 1. Click Manual tab > Motherboard Installation Guide. 2. From the Manual folder, open the folder of the software manual that you wish to read. Chapter 4 ASUS MAXIMUS VIII GENE 4-9
  • Asus MAXIMUS VIII GENE | User Guide - Page 140
    manuals containing in the support DVD vary by models. 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide AI Suite 3 on your computer: Windows® 7 OS 1. Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click Run
  • Asus MAXIMUS VIII GENE | User Guide - Page 141
    Utilities tab and check AI Suite 3 and select Install. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the following steps: a. Go to the Start , click the AI Suite 3 app on the Start screen). Chapter 4 ASUS MAXIMUS VIII GENE 4-11
  • Asus MAXIMUS VIII GENE | User Guide - Page 142
    Suite 3 main menu bar Chapter 4 • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-12 Chapter 4: Software
  • Asus MAXIMUS VIII GENE | User Guide - Page 143
    on real-time usage to provide the best system status. It covers the essential areas such as CPU performance, energy saving, stable digital power, cool and quiet fan control, and includes tailored settings DO NOT remove your fan during the tuning process. Chapter 4 ASUS MAXIMUS VIII GENE 4-13
  • Asus MAXIMUS VIII GENE | User Guide - Page 144
    adjustments • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Frequency in TPU. Refer to the BIOS chapter of your motherboard's user guide for details. • The CPU Frequency bars show the status of the CPU cores, which vary with your CPU model. 4-14 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 145
    GPU Boost CPU Graphics Voltage Adjustments Click to load the saved profile Click to save the Click to enable the adjustment into a profile default settings Click to apply the adjustments Click to undo the adjustments Chapter 4 ASUS MAXIMUS VIII GENE 4-15
  • Asus MAXIMUS VIII GENE | User Guide - Page 146
    select a setting for Voltage Decrement Click to enable the default settings Click to undo the Click to apply the adjustments adjustments Chapter 4 4-16 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 147
    brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential. CPU Power Duty Control CPU Power Duty Control adjusts the current of every VRM phase and the thermal conditions of every phase component. ASUS MAXIMUS VIII GENE 4-17 Chapter 4
  • Asus MAXIMUS VIII GENE | User Guide - Page 148
    quiet computing environment. With its fan Auto Tuning feature, ASUS Fan Xpert 3 automatically tweaks the settings of CPU and chassis fans to achieve their best cooling performance. ASUS Fan Xpert 3 also supports hardware level PWM/DC combo mode for the CPU and chassis fans. You can also reduce the
  • Asus MAXIMUS VIII GENE | User Guide - Page 149
    changes Applications list pane Displays all the running applications on your system. Turbo App List pane Displays the applications added to the Turbo App List. Clieck the settings. icon for more * Only applications on the Turbo App List can be configured. Chapter 4 ASUS MAXIMUS VIII GENE 4-19
  • Asus MAXIMUS VIII GENE | User Guide - Page 150
    + is available only in selected motherboard models. Ai Charger+ screen Tick to enable or disable Ai Charger+ Click to apply the selection • * Check the manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may
  • Asus MAXIMUS VIII GENE | User Guide - Page 151
    USB 3.1 Boost automatically detects the USB devices that support UASP. For a list of UASP-supported USB devices, visit the ASUS website at www.asus.com. • The data transfer speed varies with USB devices. For a higher data transfer performance, use a USB 3.1 device. Chapter 4 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 152
    is a utility that allows you to automatically update your motherboard's software, drivers, or BIOS. With this utility, you can also manually update the BIOS and select the boot logo that will display during POST. Launching EZ Update To launch EZ Update, click on the left of the AI Suite 3 main
  • Asus MAXIMUS VIII GENE | User Guide - Page 153
    , click on the left of the AI Suite 3 main menu, then select System Information. Viewing the motherboard information Click the MB tab to view the motherboard's information. Viewing the CPU information Click the CPU tab to view the processor's information. Chapter 4 ASUS MAXIMUS VIII GENE 4-23
  • Asus MAXIMUS VIII GENE | User Guide - Page 154
    Viewing the SPD information Click the SPD tab to view the memory's information. Chapter 4 4-24 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 155
    / Mouse sharing Set Hotkey for Audio Mode Select device for Keyboard/Mouse sharing Select device for audio Audio Mode Click to apply the settings Chapter 4 ASUS MAXIMUS VIII GENE 4-25
  • Asus MAXIMUS VIII GENE | User Guide - Page 156
    you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. 4-26 Chapter 4: Software Support Chapter 4
  • Asus MAXIMUS VIII GENE | User Guide - Page 157
    to your smart device Tick to select the smart device Tick to send alert when the selected items are back to its normal status Chapter 4 ASUS MAXIMUS VIII GENE 4-27
  • Asus MAXIMUS VIII GENE | User Guide - Page 158
    to scan more host computers Tick to select the smart device Click to send your message Tap to delete PC alerts Chapter 4 4-28 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 159
    Follow the installation wizard to install the Realtek® Audio Manager driver from the support DVD that is bundled with the motherboard. If the Realtek® audio software is correctly installed, you offers one of the best virtual surround technology for gaming. Chapter 4 ASUS MAXIMUS VIII GENE 4-29
  • Asus MAXIMUS VIII GENE | User Guide - Page 160
    the Equalizer is enabled. This item allows you to configure the Equalizer settings. You can manually set or customized your setting or choose from any of the preset equalizer settings available. Equalizer to change the language or view the tutorial. Chapter 4 4-30 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 161
    the play button to start the test for the selected preset profile. Noise Gate mode Click to choose the Noise Gate mode from Auto or Manual. Manual mode allows you to use the slider to adjust the Noise Gate and Noise Reduction. ASUS MAXIMUS VIII GENE 4-31 Chapter 4
  • Asus MAXIMUS VIII GENE | User Guide - Page 162
    Casting Enhancer Chapter 4 4-32 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 163
    set at Performance Amplify Level is automatically set at Powerful Amplify Level is automatically set at Extreme The device plugged in detected as other device ASUS MAXIMUS VIII GENE 4-33 Chapter 4
  • Asus MAXIMUS VIII GENE | User Guide - Page 164
    After you close the pop-window, Sonic SenseAmp enters speaker configuration and displays the adjusted headphone impedance. Click to manually adjust the amplify level Displays the impedance of your headphone Chapter 4 4-34 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 165
    DTS Connect DTS Connect delivers excellent audio entertainment across all formats and works with 4, 5.1 and 7.1 channels of incredible surround sound . It also allows you to connect your PC to a home theatre system. Control settings panel Chapter 4 ASUS MAXIMUS VIII GENE 4-35
  • Asus MAXIMUS VIII GENE | User Guide - Page 166
    settings and menus. Click to reset to the default settings Click to start the test tone Use the sliders to adjust the settings Displays the list of games Control Menu Allows you to configure shortcut keys. Chapter 4 4-36 Chapter 4: Software
  • Asus MAXIMUS VIII GENE | User Guide - Page 167
    Mode/Radar Selection are enabled with shortcut keys in the game. Refer to the Controls tab for more information about the shortcut key settings. Chapter 4 ASUS MAXIMUS VIII GENE 4-37
  • Asus MAXIMUS VIII GENE | User Guide - Page 168
    Game, Media Streaming and File Sharing) facilitating different user scenarios. Users can also manually allocate bandwidth and adjust priority settings of each application to run faster and smoother. Sharing Mode File-sharing packets given top priority. Chapter 4 4-38 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 169
    consuming applications currently used. Application usage Displays the individual downloading and uploading bandwidth of currently used applications. Total usage Displays the total downloading and uploading bandwidth of the currently used applications. Chapter 4 ASUS MAXIMUS VIII GENE 4-39
  • Asus MAXIMUS VIII GENE | User Guide - Page 170
    use this feature to test the Internet Service Provider (ISP) speed or manually key in the desired uploading/downloading speed and apply the speed if needed. Key in the upload/ download speed Click to begin the speed test Click to apply the speed after manually keying in the desired speed or after
  • Asus MAXIMUS VIII GENE | User Guide - Page 171
    . You can also configure your PC for overclocking, or enter BIOS directly. 1. Connect the USB keyboard into the dedicated KeyBot USB port. Refer to the Rear I/O connection section for more information click their corresponding keys on the keyboard Smart Input Chapter 4 ASUS MAXIMUS VIII GENE 4-41
  • Asus MAXIMUS VIII GENE | User Guide - Page 172
    Function Keys Shortcut Chapter 4 4-42 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 173
    ASUS HomeCloud then select Media Streamer. On your device, click Media Streamer. Click to edit media files Click to select media type Log in ASUS account to stream Click a media file to play play in different networks Select the device you want to stream to Chapter 4 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 174
    Click to delete selected files Click to proceed with the deletion or addition of files Click to cancel changes The following media formats are supported: .3gp, .mp4, .m4a, .aac, .ts, .flac, .mp3, .mid, .xmf, .mxmf, .rtttl, .rtx, .ota, .imy, .ogg, .mkv, .wav, .jpg, .gif, .png, .bmp, .webp, .webm
  • Asus MAXIMUS VIII GENE | User Guide - Page 175
    the system when needed and helps extend the lifespan of your SSD or HDD. The following folders are not suitable for RAMDisk memory expansion of the system memory. Moving the swap file into the RAM Disk simply defects the whole purpose of having it and may affect your ASUS MAXIMUS VIII GENE 4-45
  • Asus MAXIMUS VIII GENE | User Guide - Page 176
    select where to create a junction point. Click to finish adding the new junction point. Click to delete the existing junction point. Chapter 4 4-46 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 177
    Synchronizing backup files After creating a junction point, RAMDisk automatically creates a backup folder in the file's original location. Use RAMDisk to manually synchronize updates with these backup files. Click Synchronize to update your files Chapter 4 ASUS MAXIMUS VIII GENE 4-47
  • Asus MAXIMUS VIII GENE | User Guide - Page 178
    and compare with other users on the ROG website. MemTweakIt functions depends on the chipset on the motherboard. Each chipset has differernt options. To use MemTweakIt, double-click on the desktop. Click a tab apply your settings Click to validate your settings. 4-48 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 179
    your configuration manually: 1. Launch MemTweakIt and click Validate. 2. In Manual Mode, click ASUS account ID and password. 6. Click Browse, locate the saved .cvf file, and click Open. 7. Click Submit. Your configuration will be displayed in MemTweakIt webpage. Chapter 4 ASUS MAXIMUS VIII GENE
  • Asus MAXIMUS VIII GENE | User Guide - Page 180
    and status of your CPU, motherboard, memory, graphics card, and other components installed in your system. You can generate a report about your system info and send or post it on the CPU-Z website. To use ROG CPU-Z, double-click on the desktop. Chapter 4 4-50 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 181
    I/O demands. RAMCache copies the most frequently used data from the disk to the RAM cache where it can be processed faster, and then automatically writes it back to one partition at a time. • Min and Max amounts of RAM at disposal is automatically updated. ASUS MAXIMUS VIII GENE 4-51 Chapter 4
  • Asus MAXIMUS VIII GENE | User Guide - Page 182
    Chapter 4 4-52 Chapter 4: Software Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 183
    motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 10 and RAID 5 configuration. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver for this setup. ASUS MAXIMUS VIII GENE 5-1
  • Asus MAXIMUS VIII GENE | User Guide - Page 184
    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal RAID Mode]. 4. Save your changes, and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup Due to chipset limitation, when SATA ports are set
  • Asus MAXIMUS VIII GENE | User Guide - Page 185
    allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS MAXIMUS VIII GENE 5-3
  • Asus MAXIMUS VIII GENE | User Guide - Page 186
    RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done 5-4 Chapter 5: RAID Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 187
    to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. ASUS MAXIMUS VIII GENE 5-5
  • Asus MAXIMUS VIII GENE | User Guide - Page 188
    "Volume0"? (Y/N): 3. Press to delete the RAID set and return to the utility main menu, or press to return to the DELETE VOLUME menu. 5-6 Chapter 5: RAID Support
  • Asus MAXIMUS VIII GENE | User Guide - Page 189
    drive. 5. Save changes and exit BIOS. 6. When the Make Disk menu appears, press to create a RAID driver disk. 7. Insert a formatted floppy disk into the USB floppy disk drive, then press . 8. Follow the succeeding screen instructions to complete the process. ASUS MAXIMUS VIII GENE 5-7
  • Asus MAXIMUS VIII GENE | User Guide - Page 190
    disk. 3. Place the motherboard support DVD into the optical drive. 4. Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process
  • Asus MAXIMUS VIII GENE | User Guide - Page 191
    radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that could void the user's authority to operate this equipment. Appendix ASUS MAXIMUS VIII GENE A-1
  • Asus MAXIMUS VIII GENE | User Guide - Page 192
    Appendix IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry
  • Asus MAXIMUS VIII GENE | User Guide - Page 193
    our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment License. ASUS MAXIMUS VIII GENE A-3
  • Asus MAXIMUS VIII GENE | User Guide - Page 194
    ai requisiti essenziali e alle altre disposizioni pertinenti alle direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE. ASUS AsusTek Inc CE CE Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovaraju
  • Asus MAXIMUS VIII GENE | User Guide - Page 195
    Str. 21-23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923 Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/ ASUS MAXIMUS VIII GENE A-5
  • Asus MAXIMUS VIII GENE | User Guide - Page 196
    TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : MAXIMUS VIII GENE conform with the 301 908-2 V5.2.1(2011-07) EN 301 893 V1.7.1(2012-06) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001 EN 62479:2010
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Motherboard
MAXIMUS
VIII GENE