Asus MAXIMUS VIII GENE User Guide - Page 88
CPU System Agent Boot Voltage [Auto]
View all Asus MAXIMUS VIII GENE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
CPU Power Phase Control [Auto] This item allows you to set the power phase control of the CPU. Configuration options: [Auto] [Standard] [Optimized] [Extreme] CPU Power Thermal Control [115] Higher temperature provides a wider CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential. Configuration options: [115] - [136] DO NOT remove the thermal module. The thermal conditions should be monitored Boot Voltages CPU Core/Cache Boot Voltage [Auto] The voltage for CPU at initial boot. Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage [Auto] The voltage for DMI at initial boot. Configuration options: [Auto] [0.300] - [1.900] Core PLL Boot Voltage [Auto] The voltage for Core PLL at initial boot. Configuration options: [Auto] [0.70000] - [2.40000] CPU System Agent Boot Voltage [Auto] The voltage for CPU System Agent at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage [Auto] The voltage for CPU VCCIO at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) [Enabled] Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Enabled] [Disabled] Turbo Mode [Enabled] Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] The following items appear only when you set the Turbo Mode to [Enabled]. Chapter 3 3-16 Chapter 3: BIOS Setup