Asus MAXIMUS VIII HERO User Guide

Asus MAXIMUS VIII HERO Manual

Get Asus MAXIMUS VIII HERO PDF manuals and user guides View all Asus MAXIMUS VIII HERO manuals
Add to My Manuals
Save this manual to your list of manuals

Asus MAXIMUS VIII HERO manual content summary:

  • Asus MAXIMUS VIII HERO | User Guide - Page 1
    Motherboard MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL from http://support.asus.com/download problems
  • Asus MAXIMUS VIII HERO | User Guide - Page 3
    guide...vii MAXIMUS VIII HERO specifications summary ix Package contents...xiv Installation tools and components xv Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 ROG Gaming Features 1-3 1.1.3 ROG Exclusive Features 1-4 1.1.4 ASUS Special
  • Asus MAXIMUS VIII HERO | User Guide - Page 4
    menu 3-43 3.9 Tool menu 3-48 3.9.1 ASUS EZ Flash 3 Utility 3-48 3.9.2 Secure Erase 3-48 3.9.3 ASUS Overclocking Profile 3-50 3.9.4 ROG OC Panel H-Key Configure 3-51 3.9.5 ASUS SPD Information 3-52 3.9.6 Graphics Card Information 3-52 3.10 Exit menu 3-53 3.11 Updating BIOS 3-54 iv
  • Asus MAXIMUS VIII HERO | User Guide - Page 5
    ROG CPU-Z 4-43 4.14 RAMCache 4-44 Chapter 5: RAID Support 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting the RAID item in BIOS 5-2 5.1.4 Intel® Rapid Storage Technology Option ROM utility 5-3 5.2 Creating a RAID driver
  • Asus MAXIMUS VIII HERO | User Guide - Page 6
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vi
  • Asus MAXIMUS VIII HERO | User Guide - Page 7
    the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the
  • Asus MAXIMUS VIII HERO | User Guide - Page 8
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus MAXIMUS VIII HERO | User Guide - Page 9
    MAXIMUS VIII HERO specifications summary CPU Chipset Memory Expansion slots Graphic Multi-GPU support Storage LGA1151 socket for 6th Generation Intel® Core™ Processors Supports 14 nm CPU Supports Intel® Turbo Boost Technology 2.0* * *Intel® Turbo Boost Technology 2.0 support depends on the CPU
  • Asus MAXIMUS VIII HERO | User Guide - Page 10
    MAXIMUS VIII HERO specifications summary LAN Audio USB Back I/O Ports Intel® I219-V Gigabit LAN- Dual supports ASUS USB 3.1 Boost: - 2 x USB 3.0 ports (1 Type-A [red] and 1 Type-C at back panel [black]) * 2 x USB2.0 port at mid-board shares with ROG extension (ROG_EXT) port. 1 x BIOS Flashback
  • Asus MAXIMUS VIII HERO | User Guide - Page 11
    MAXIMUS VIII HERO specifications summary overclocking - X.M.P. - DirectKey - Clr CMOS - Power On UEFI BIOS features: - Extreme Tweaker - Tweakers' Paradise - ROG SSD Secure TPU, EPU, DIGI+ Power Control, Fan Xpert 3, and Turbo App ASUS Exclusive Features - AI Suite 3 - USB 3.1 Boost - AI Charger
  • Asus MAXIMUS VIII HERO | User Guide - Page 12
    MAXIMUS VIII HERO specifications summary Special Features Internal I/O Ports ASUS EZ DIY - USB BIOS Flashback - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - ASUS C.P.R.(CPU Parameter Recall) - MemOK! ASUS Q-Design - Q-Code - Q-Shield - Q-Connector - Q-LED (CPU, DRAM, VGA, Boot Device LED) - Q-Slot -
  • Asus MAXIMUS VIII HERO | User Guide - Page 13
    MAXIMUS VIII HERO specifications summary BIOS Manageability Software Operating System Support Form Factor 1 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.8, ACPI 5.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3 My Favorites,
  • Asus MAXIMUS VIII HERO | User Guide - Page 14
    Application DVD Documentation ROG MAXIMUS VIII HERO 3 x 2-in-1 SATA 6 Gb/s cables 1 x SLI® bridge 1 x I/O Shield 1 x 12-in-1 ROG cable label 1 x 2-in-1 Q-Connector kit 1 x ROG Door Hanger 1 x CPU Installation Tool 1 x CPU Fan Label 1 x M.2 Screw ROG motherboard support DVD User guide If any of the
  • Asus MAXIMUS VIII HERO | User Guide - Page 15
    (cross) screwdriver PC chassis Power supply unit Intel LGA 1151 CPU Intel LGA 1151 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package. xv
  • Asus MAXIMUS VIII HERO | User Guide - Page 16
    xvi
  • Asus MAXIMUS VIII HERO | User Guide - Page 17
    ®/CrossFire™ On-Demand This motherboard supports multi-GPU SLI®/CrossFireX™ graphics cards for an unrivalled gaming performance. With the Intel® Z97 platform to optimize the PCIe allocation of multiple GPUs, it supports up to 2-WAY GPU SLI® or CrossFireX™ configuration. ASUS MAXIMUS VIII HERO 1-1
  • Asus MAXIMUS VIII HERO | User Guide - Page 18
    will automatically disable those ports when an M.2 card is inserted. Supports 2242 (22 mm x 42 mm), 2260 (22 mm x 60 mm), 2280 (22 mm x 80 mm), and 22110 (22 mm x 110 mm) SSD cards. Complete USB 3.0 integration This motherboard offers you the strategic USB 3.0 accessibility for both the front and
  • Asus MAXIMUS VIII HERO | User Guide - Page 19
    the motherboard that CPU utilization for a smooth networking experience. It has advanced features including advanced interrupt-handling, low-power consumption, and Intel Stable Image Platform Program (SIPP) support thanks to its compatibility with the Intel CPU and chipset. ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 20
    also configure your PC to wake up in CPU Level UP, XMP, or directly to BIOS mode. This feature supports USB keyboards only. 1.1.4 ASUS Special Features AI Suite 3 With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features into one simple-to-use software package
  • Asus MAXIMUS VIII HERO | User Guide - Page 21
    on personal computers, and sending encoded bitstreams out of a digital audio connection (such as S/PDIF or HDMI) designed to deliver audio to an external decoder. ASUS MAXIMUS VIII HERO 1-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 22
    note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from antistatic pad or in the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or
  • Asus MAXIMUS VIII HERO | User Guide - Page 23
    1.2.2 Motherboard layout Chapter 1 Refer to Internal connectors and Rear I/O connection for more information about rear panel connectors and internal connectors. ASUS MAXIMUS VIII HERO 1-7
  • Asus MAXIMUS VIII HERO | User Guide - Page 24
    CPU Socket 3. CPU, water pump, CPU optional, extension, and chassis fan connectors (4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-4) 4. DDR4 DIMM slots 5. MemOK! button 6. Q_Code LEDs 7. USB 3.0 connector (20-1 pin USB3_12; USB3_34) 8. Intel® Z170 Serial ATA 6 Gb
  • Asus MAXIMUS VIII HERO | User Guide - Page 25
    Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. ASUS MAXIMUS VIII HERO 1-9
  • Asus MAXIMUS VIII HERO | User Guide - Page 26
    Chapter 1 1.2.4 System memory The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory
  • Asus MAXIMUS VIII HERO | User Guide - Page 27
    32-bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 28
    Chapter 1 MAXIMUS VIII HERO Motherboard Qualified Vendors Lists (QVL) DDR4 3466 MHz capability Vendors Part 1.35V G.SKILL F4-3400C16Q-16GRBD 16GB (4 x 4GB) SS - - 16-18-18-38 1.35V DIMM socket support (Optional) 2 4 • • • • • • DDR4 3333 MHz capability Vendors Part No. Size SS/ DS
  • Asus MAXIMUS VIII HERO | User Guide - Page 29
    - 15-17-17-35 - 16-16-16-39 - 16-16-16-36 Voltage DIMM socket support (Optional) 24 1.35V • • 1.35V • • 1.35V • 1.35V • • 1.35V support (Optional) 24 1.35V • • 1.35V • • 1.35V • 1.35V • • 1.35V • • 1.35V • • 1.35V • • 1.35V • • ASUS MAXIMUS VIII HERO 1-13
  • Asus MAXIMUS VIII HERO | User Guide - Page 30
    - (XMP) 8GB ) Kingston HX428C14PBK4/16 16GB ( 4x SS - - (XMP) 4GB ) Panram PUD42800C164G4NJW 16GB ( 4x SS - - (XMP) 4GB ) Timing 17-17-17-36 Voltage 1.2 DIMM socket support (Optional) 124 ••• 15-15-15-36 1.2 17-17-17-36 17-17-17-36 15-15-15-35 1.35 16-16-16-36 1.2 ••• 16-18
  • Asus MAXIMUS VIII HERO | User Guide - Page 31
    1.2 DIMM socket support (Optional) 124 • • 1.2 • • 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 ••• 1.2 • • 1.2 ••• 1.2 ••• 1.2 ••• ASUS MAXIMUS VIII HERO 1-15
  • Asus MAXIMUS VIII HERO | User Guide - Page 32
    K4A4G085WD Samsung K4A4G085WD V-color DW3J0460HM Timing 16-16-16-39 Voltage 1.2 DIMM socket support (Optional) 124 ••• 14-16-16-31 1.2 ••• 14-16-16-31 35 15-15-15-36 13-15-15-28 Voltage 1.2 1.2 1.2 1.2 1.2 DIMM socket support (Optional) 124 ••• ••• ••• ••• ••• ••• •• 13-15-15-28 1.2 ••• 13
  • Asus MAXIMUS VIII HERO | User Guide - Page 33
    configuration. • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS MAXIMUS VIII HERO 1-17
  • Asus MAXIMUS VIII HERO | User Guide - Page 34
    slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. Slot Description 1 PCIe 3.0 x1_1 slot 2 PCIe 3.0 x16/x8_1 slot 3 PCIe 3.0 x1_2 slot 4 PCIe 3.0 x8_2 slot 5 PCIe 3.0 x1_3 slot
  • Asus MAXIMUS VIII HERO | User Guide - Page 35
    fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment. • New 6th generation Intel® Core™ processors support PCIe 3.0 speed rate. PCIe_x16/x8_1 slot switches to x8 mode when PCIe_x8_2 slot is occupied. ASUS MAXIMUS VIII HERO 1-19
  • Asus MAXIMUS VIII HERO | User Guide - Page 36
    Chapter 1 PCIe operating mode Motherboard Layout M.2 M.2 M.2 M.2 M.2 PCIEX1_1 Modes Auto PCIe PCIe X1 X4 x1 x1 x1 - PCIE_X16/X8_1 - x1 - - PCIEX1_2 x1 - x1 - PCIE_X8_2 ---- PCIEX1_3 x1 - x1 - PCIEX4_3 x1 x4 x1
  • Asus MAXIMUS VIII HERO | User Guide - Page 37
    change settings to enhance system performance. 1. Power-on button (START) The motherboard comes with a power-on button that allows you to power up or wake installing any motherboard component. 2. RESET button (RESET) Press the reset button to reboot the system. ASUS MAXIMUS VIII HERO 1-21
  • Asus MAXIMUS VIII HERO | User Guide - Page 38
    press the MemOK! button to boot and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function. 1-22
  • Asus MAXIMUS VIII HERO | User Guide - Page 39
    4. Clear CMOS button (CLR_CMOS) Press this button to clear the BIOS setup information only when the systems hangs due to overclocking. Chapter 1 ASUS MAXIMUS VIII HERO 1-23
  • Asus MAXIMUS VIII HERO | User Guide - Page 40
    Q LEDs (BOOT_DEVICE_LED, VGA_LED, DRAM_LED, CPU_LED) Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED flashes until the problem is solved. This user-friendly design provides an intuitive
  • Asus MAXIMUS VIII HERO | User Guide - Page 41
    3. Q-Code LED The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the following page for details. Chapter 1 ASUS MAXIMUS VIII HERO 1-25
  • Asus MAXIMUS VIII HERO | User Guide - Page 42
    type or incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed (continued on the next page) 1-26 Chapter 1: Product
  • Asus MAXIMUS VIII HERO | User Guide - Page 43
    error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU error Reset Error Reserved for future AMI error codes (continued on the next page) ASUS MAXIMUS VIII HERO 1-27
  • Asus MAXIMUS VIII HERO | User Guide - Page 44
    error codes DXE Core is started NVRAM initialization Installation of the PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization future AMI DXE codes Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot
  • Asus MAXIMUS VIII HERO | User Guide - Page 45
    Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug (continued on the next page) ASUS MAXIMUS VIII HERO 1-29
  • Asus MAXIMUS VIII HERO | User Guide - Page 46
    (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error PCH initialization error Some returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ACPI/ASL Checkpoints Code 0x01
  • Asus MAXIMUS VIII HERO | User Guide - Page 47
    1.2.8 Jumper 1. LN2 Mode jumper (3-pin LN2_MODE) With LN2 mode activated, the ROG motherboard is optimized to remedy the cold-boot bug during POST and help the system boot successfully. Chapter 1 ASUS MAXIMUS VIII HERO 1-31
  • Asus MAXIMUS VIII HERO | User Guide - Page 48
    Configuration for details. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section SATA Configuration for details. 1-32 Chapter 1: Product Introduction
  • Asus MAXIMUS VIII HERO | User Guide - Page 49
    are based on xHCI specification. We recommend you to install the related driver to fully use the USB 3.0 ports under Windows® 7, Windows® 8, and Windows® 8.1. • The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the operating system's setting. ASUS MAXIMUS VIII HERO 1-33
  • Asus MAXIMUS VIII HERO | User Guide - Page 50
    cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. 1 x USB 2.0 ports (USB1314) at mid
  • Asus MAXIMUS VIII HERO | User Guide - Page 51
    panel audio I/O module that supports HD Audio standard. Connect motherboard's high-definition audio capability. • If you want to connect a high-definition or an AC'97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 52
    air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector. The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. 1-36
  • Asus MAXIMUS VIII HERO | User Guide - Page 53
    system stability. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS MAXIMUS VIII HERO 1-37
  • Asus MAXIMUS VIII HERO | User Guide - Page 54
    System panel connector (20-5 pin PANEL) This connector supports several chassis-mounted functions. Chapter 1 • System power the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power button for more than four seconds while the system is ON turns
  • Asus MAXIMUS VIII HERO | User Guide - Page 55
    (14-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance the network security, protects digital identities, and ensures platform integrity. ASUS MAXIMUS VIII HERO 1-39
  • Asus MAXIMUS VIII HERO | User Guide - Page 56
    is for the thermistor cable that allows you to monitor the temperature of your motherboard's critical components and connected devices. Chapter 1 12. M.2 (Socket 3) The M.2 (Socket 3) with M Key supports type 2242 (22mm x 42mm), 2260 (22mm x 60mm), 2280 (22mm x 80mm), and 22110 (22mm x 110mm
  • Asus MAXIMUS VIII HERO | User Guide - Page 57
    I/O card that supports Intel's Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately. ASUS MAXIMUS VIII HERO 1-41
  • Asus MAXIMUS VIII HERO | User Guide - Page 58
    Chapter 1 1-42 Chapter 1: Product Introduction
  • Asus MAXIMUS VIII HERO | User Guide - Page 59
    may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. Chapter 2 ASUS MAXIMUS VIII HERO 2-1
  • Asus MAXIMUS VIII HERO | User Guide - Page 60
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 61
    2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket. Chapter 2 Top of CPU Bottom of CPU Bottom of CPU ASUS MAXIMUS VIII HERO 2-3
  • Asus MAXIMUS VIII HERO | User Guide - Page 62
    installing it onto the CPU socket on the motherboard. • Use the CPU Installation Tool for installing the CPU only. DO NOT damage or bend the CPU Installation Tool. • Always firmly hold both sides of the CPU Installation Tool when installing, removing, or picking up the CPU Installation Tool. • ASUS
  • Asus MAXIMUS VIII HERO | User Guide - Page 63
    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly Chapter 2 ASUS MAXIMUS VIII HERO 2-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 64
    To uninstall the CPU heatsink and fan assembly Chapter 2 2-6 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 65
    2.1.4 DIMM installation Chapter 2 To remove a DIMM ASUS MAXIMUS VIII HERO 2-7
  • Asus MAXIMUS VIII HERO | User Guide - Page 66
    2.1.5 ATX Power connection Chapter 2 OR OR 2-8 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 67
    2.1.6 SATA device connection OR OR Chapter 2 ASUS MAXIMUS VIII HERO 2-9
  • Asus MAXIMUS VIII HERO | User Guide - Page 68
    2.1.7 Front I/O Connector To install ASUS Q-Connector Chapter 2 To install USB 2.0 connector To install front panel audio connector USB 2.0 To install USB 3.0 connector USB 3.0 2-10 AAFP Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 69
    2.1.8 Expansion Card installation To install PCIe x16 cards Chapter 2 ASUS MAXIMUS VIII HERO 2-11
  • Asus MAXIMUS VIII HERO | User Guide - Page 70
    3. • Connect your USB keyboard on the KeyBot port if you want to use the KeyBot feature. Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system's failure to boot up, please contact your local ASUS Service Center. 2-12 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 71
    Flashback function. 7. Intel® USB 2.0 ports 9 and 10. 8. HDMI port 9. USB 3.1 Type-C port EC1. 10. Intel® USB 3.0 ports 5 and 6 11. Optical S/PDIF OUT port 12. Audio I/O ports** * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 72
    3.0 devices can only be used under Windows® 7 and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as data storage only. • We Intel chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update
  • Asus MAXIMUS VIII HERO | User Guide - Page 73
    Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers Chapter 2 ASUS MAXIMUS VIII HERO 2-15
  • Asus MAXIMUS VIII HERO | User Guide - Page 74
    Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-16 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 75
    on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ASUS MAXIMUS VIII HERO 2-
  • Asus MAXIMUS VIII HERO | User Guide - Page 76
    Chapter 2 2-18 Chapter 2: Basic Installation
  • Asus MAXIMUS VIII HERO | User Guide - Page 77
    Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as M8H.CAP for this motherboard. Chapter 3 ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 78
    try to clear the CMOS and reset the motherboard to the default value. See section Onboard buttons for more information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the bluetooth devices. BIOS menu screen The BIOS Setup program can be used under two
  • Asus MAXIMUS VIII HERO | User Guide - Page 79
    BIOS setup program Creates storage RAID and configures system overclocking Chapter 3 Enables or disables the Intel Rapid Storage Technology Displays the CPU Fan's speed. Click the button to manually options vary depending on the devices you installed to the system. ASUS MAXIMUS VIII HERO 3-3
  • Asus MAXIMUS VIII HERO | User Guide - Page 80
    The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer help Last modified settings Go back to EZ Mode Displays the CPU temperature, CPU, and memory voltage output 3-4 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 81
    to manually tweak the fans to your desired settings. EZ Tuning Wizard(F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA mode from AHCI to RAID mode. Chapter 3 ASUS MAXIMUS VIII HERO 3-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 82
    Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes. Hot keys
  • Asus MAXIMUS VIII HERO | User Guide - Page 83
    keyboard or click to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen then click the plus sign ("+") to save it . • Configuration items such as Memory SPD Information, system time and date. ASUS MAXIMUS VIII HERO 3-7
  • Asus MAXIMUS VIII HERO | User Guide - Page 84
    3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Chapter 3 3-8 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 85
    . Chapter 3 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS MAXIMUS VIII HERO 3-9
  • Asus MAXIMUS VIII HERO | User Guide - Page 86
    . After you clear the password, the Administrator Password item on top of the screen shows Not Installed. User Password If you have set a user password, you must enter the user password for accessing Password item on top of the screen shows Not Installed. Chapter 3 3-10 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 87
    (X.M.P.) Technology, choose this item to set the profiles supported by your memory modules for optimizing the system performance. The [X.M.P.] configuration option appears only when you install memory modules supporting the eXtreme Memory Profile(X.M.P.) Technology. ASUS MAXIMUS VIII HERO 3-11
  • Asus MAXIMUS VIII HERO | User Guide - Page 88
    Manual the XMP mode supported by the installed memory module is item allows you to set frequency update rate. Lower values speed up clock ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Auto] This item allows you to set the CPU
  • Asus MAXIMUS VIII HERO | User Guide - Page 89
    the 2-Core Ratio Limit. 2-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 2-Core Limit value that must be higher than or equal to the 3-Core granularity. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII HERO 3-13
  • Asus MAXIMUS VIII HERO | User Guide - Page 90
    ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU core/cache voltage and achieve the best energy saving condition. Configuration options: [Disabled] [Enabled] GPU SVID Support [Auto] Disable this item to stop the CPU BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 91
    this item to enable or disable memory scrambler support. Configuration options: [Enabled] [Disabled] Channel CPU and VRM thermal conditions. Select from levels 1 to 8 to adjust the CPU power voltage from 0% to 100%. Configuration options [Auto] [Level 1] - [Level 8] Chapter 3 ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 92
    loading for extra power support. CPU VRM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] DO NOT remove
  • Asus MAXIMUS VIII HERO | User Guide - Page 93
    module. The thermal conditions should be monitored CPU Graphics Load-line Calibration [Auto] The load-line is defined by the Intel VRM specification and affects the GT power voltage values when overclocking or under a high GT loading for extra power support. Chapter 3 ASUS MAXIMUS VIII HERO 3-17
  • Asus MAXIMUS VIII HERO | User Guide - Page 94
    only when you set the CPU Graphics to [Manual]. CPU Graphics Frequency (KHz) [500 under a high CPU loading for extra power support. DRAM Power Manual] to configure a higher frequency for a quicker transient response speed. Configuration options: [Auto] [Manual] Chapter 3 3-18 Chapter 3: BIOS
  • Asus MAXIMUS VIII HERO | User Guide - Page 95
    when the manual mode is selected. The thermal conditions should be monitored. Boot Voltages CPU Core/Cache Boot Voltage [Auto] The voltage for CPU at ] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep ASUS MAXIMUS VIII HERO 3-19
  • Asus MAXIMUS VIII HERO | User Guide - Page 96
    ] [0.01] - [62.49] CPU Core/Cache Current Limit Max. [Auto 00] - [255.50] CPU Graphics Current Limit Max. [Auto Min. CPU Cache Ratio [Auto] This item allows you to set the minimum possible CPU cache ratio ] Max. CPU Cache Ratio [Auto] This item allows you to set the maximum possible CPU cache ratio
  • Asus MAXIMUS VIII HERO | User Guide - Page 97
    [0.250] This item allows you to configure the CPU core voltage offset value. Configuration options: [0.250] - [1.920] Offset Voltage [Auto] This item allows you to configure the CPU core voltage offset value. Configuration options: [Auto] [0.001] - [0.999] Chapter 3 ASUS MAXIMUS VIII HERO 3-21
  • Asus MAXIMUS VIII HERO | User Guide - Page 98
    you set the CPU Graphics Voltage Mode to [Manual Mode]. CPU Graphics Voltage Override [Auto] Allows you to configure the CPU Graphics Voltage. the voltage by a negative value. CPU Graphics Voltage Offset [Auto] This item allows you to configure the CPU core voltage offset value. Configuration
  • Asus MAXIMUS VIII HERO | User Guide - Page 99
    : [Auto] [0] - [63] 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 3 ASUS MAXIMUS VIII HERO 3-23
  • Asus MAXIMUS VIII HERO | User Guide - Page 100
    that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 Active Processor Cores [All] This item allows you to select the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] Intel Virtualization
  • Asus MAXIMUS VIII HERO | User Guide - Page 101
    [Auto] This item allows you to set the a C-state limit for the CPU package. Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [Auto] CFG Lock [Enabled] This item allows you to disable or enable the CFG Lock. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS MAXIMUS VIII HERO 3-25
  • Asus MAXIMUS VIII HERO | User Guide - Page 102
    for the Windows Vista operating system to control the Active State Power Management (ASPM) support for devices. [Enabled] Vista controls the ASPM support for the device. [Disabled] BIOS controls the ASPM support for the device. PCH - PCI Express DMI Link ASPM Control [Disabled] This item is
  • Asus MAXIMUS VIII HERO | User Guide - Page 103
    ASPM Support [Disabled] Select the ASPM level for energy saving conditions. Configuration options: [Disabled] [L0s] [L1s] [L0sL1] [Auto] SA - of the Active State Power Management for the PEG 0. Configuration options: [Disabled] [Auto] [ASPM L0s] [L1] [L0sL1] Chapter 3 ASUS MAXIMUS VIII HERO 3-27
  • Asus MAXIMUS VIII HERO | User Guide - Page 104
    ] [Disabled] DMI/OPI Configuration Allows you to configure the DMI/OPI settings. DMI Max Link Speed [Auto] Configuration options: [Auto] [Gen1] [Gen2] [Gen3] 3-28 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 105
    ), and S5(Soft off) states, but not light up at the S5 state when the "ErP Ready" is enabled. [Disabled] LEDs will not light up. ASUS MAXIMUS VIII HERO 3-29
  • Asus MAXIMUS VIII HERO | User Guide - Page 106
    -E 2.0 speed. Configuration options: [Auto] [Gen1] [Gen2]` 3.6.6 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Scroll down to display the other
  • Asus MAXIMUS VIII HERO | User Guide - Page 107
    the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII HERO 3-31
  • Asus MAXIMUS VIII HERO | User Guide - Page 108
    [Disabled] [Enabled] Support XHCI by XHCI drivers for operating systems with XHCI support. Support XHCI by BIOS for operating systems without XHCI support. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the
  • Asus MAXIMUS VIII HERO | User Guide - Page 109
    options: [Disabled] [Enabled] The following items appear only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable or disable the Ipv4/Ipv6 PXE boot option. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII HERO 3-33
  • Asus MAXIMUS VIII HERO | User Guide - Page 110
    3.6.9 Onboard Devices Configuration Scroll down to view the other BIOS items. Chapter 3 HD Audio Controller [Enabled] [Disabled . Configuration options: [Disabled] [Enabled] Asmedia USB 3.1 Battery Charging Support [Disabled] This item allows you to disable or enable the ASMedia USB 3.1
  • Asus MAXIMUS VIII HERO | User Guide - Page 111
    ASPM Support Intel LAN PXE Option ROM [Disabled] This item appears only when Intel LAN Controller is set to [Enabled].This item allows you to enable or disable the Intel LAN preboot execution environment (PXE) option ROM. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 112
    By PCI-E/PCI [Disabled] Allows you to enable or disable the wake-on-LAN function for the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] Generates a wake
  • Asus MAXIMUS VIII HERO | User Guide - Page 113
    to disable or enable the Intel Thunderbolt Technology. Configuration options: [Fully Disabled] [Disabled] [Enabled] ThunderBolt Boot Support [Disabled] This item allows you to disable or enable the ThunderBolt Boot Support. Configuration options: [Disabled] [Enabled] ASUS MAXIMUS VIII HERO 3-37
  • Asus MAXIMUS VIII HERO | User Guide - Page 114
    the minimum duty cycle for each fan. CPU Q-Fan Control [Auto] [Auto] Detect the type of CPU fan installed and automatically switches the mode control. [PWM Mode] Enable the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan. [DC Mode] Enable the CPU Q-Fan control feature in DC mode for
  • Asus MAXIMUS VIII HERO | User Guide - Page 115
    source. Configuration options: [CPU] [MotherBoard] [VRM] [PCH] [T_SENSOR1] [EXT_ Sensor1] [EXT_Sensor2] [EXT_Sensor3] For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the other end to the component to get the temperature. Chapter 3 ASUS MAXIMUS VIII HERO 3-39
  • Asus MAXIMUS VIII HERO | User Guide - Page 116
    ] Chassis Fan 1-4 Step Down [0 sec] This item allows you to set the value of the CPU fan step down. Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 117
    CPU temperature reaches the upper limit, the Extension Fan 1-4 will operate at the maximum duty cycle. Extension Fan 1-4 Middle Temperature [45] Use the or keys to adjust the middle limit of the Extension Fan 1-4 temperature. The values range from 20 to 75. Chapter 3 ASUS MAXIMUS VIII HERO
  • Asus MAXIMUS VIII HERO | User Guide - Page 118
    The values range from 20% to 100%. When the CPU temperature reaches the middle limit, the Extension Fan 1-4 will The values range from 0% to 100%. When the CPU temperature is under the limit, the Extension Fan PWM mode for 4-pin chassis fan. Anti Surge Support [On] Enable this item for Over Voltage
  • Asus MAXIMUS VIII HERO | User Guide - Page 119
    change the system boot options. Scroll down to display the other BIOS items. Chapter 3 Fast Boot [Enabled] [Disabled] Allows your items appear only when you set the Fast Boot to [Enabled]. SATA Support [HDD Only] [All Sata Devices] [HDD Only] [Last Boot HDD ASUS MAXIMUS VIII HERO 3-43
  • Asus MAXIMUS VIII HERO | User Guide - Page 120
    Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot
  • Asus MAXIMUS VIII HERO | User Guide - Page 121
    . Configuration options: [Legacy only] [UEFI driver first] [Ignore] Boot from Storage Devices [Legacy only] This item allows you to select the type of storage devices that you want to launch. Configuration options: [Legacy only] [UEFI driver first] [Ignore] Chapter 3 ASUS MAXIMUS VIII HERO 3-45
  • Asus MAXIMUS VIII HERO | User Guide - Page 122
    you want to launch. Configuration options: [Legacy only] [UEFI driver first] Secure Boot This item allows you to configure the Windows Windows® nonUEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. Install Default Secure Boot keys This item allows you to 3-46 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 123
    appears on the screen depends on the number of devices installed in the system. • To access Windows® OS in Safe Mode, press after POST (Windows® 8 not supported). • To select the boot device during system startup, press when the ASUS Logo appears. Chapter 3 ASUS MAXIMUS VIII HERO 3-47
  • Asus MAXIMUS VIII HERO | User Guide - Page 124
    that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the press to confirm your choice. For more details, refer to section ASUS EZ Flash 3 utility. 3.9.2 Secure Erase SSD speeds may lower over time 48 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 125
    Secure Erase is only supported on Intel SATA port. For more information about Intel SATA ports, refer to section 1.2.2 of this manual. Displays the available SSDs by ASUS. You have to unlock the SSD in the software before proceeding with Secure Erase. Chapter 3 ASUS MAXIMUS VIII HERO 3-49
  • Asus MAXIMUS VIII HERO | User Guide - Page 126
    3.9.3 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Profile Name Key in the profile name to save current BIOS settings to profile 1 to 8. Save to Profile Saves the current BIOS settings to profile number 1 to 8. Load/Save Profile from/to USB Drive Load/Save
  • Asus MAXIMUS VIII HERO | User Guide - Page 127
    This item allows you to save the new values of the CPU Core Voltage, VCCSA Voltage, BCLK Frequency, and CPU Ratio. Load from profile This item allows you to load the previous values of the CPU Core Voltage, VCCSA Voltage, BCLK Frequency, and CPU Ratio. Chapter 3 ASUS MAXIMUS VIII HERO 3-51
  • Asus MAXIMUS VIII HERO | User Guide - Page 128
    3.9.5 ASUS SPD Information This item displays the information about the graphics card installed in your system. Chapter 3 GPU Post This item displays and recommended configuration for the PCIE slots that the graphics card is installed in your system. Bus Interface This item allows you to select the
  • Asus MAXIMUS VIII HERO | User Guide - Page 129
    The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Chapter 3 Load Optimized Defaults This option allows you to load the (shellx64.efi) from one of the available filesystem devices. ASUS MAXIMUS VIII HERO 3-53
  • Asus MAXIMUS VIII HERO | User Guide - Page 130
    version of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result to system's failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary. Visit http://www.asus.com to download the latest BIOS file for this motherboard. The following
  • Asus MAXIMUS VIII HERO | User Guide - Page 131
    that contains the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. ASUS MAXIMUS VIII HERO 3-55
  • Asus MAXIMUS VIII HERO | User Guide - Page 132
    or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want
  • Asus MAXIMUS VIII HERO | User Guide - Page 133
    only and may not be exactly the same as actually shown on your computer screen. Before updating BIOS • Prepare the motherboard support DVD and a USB flash drive. • D ownload the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive. NTFS is not
  • Asus MAXIMUS VIII HERO | User Guide - Page 134
    > to switch from Files panel to Drives panel then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: MAXIMUS VIII HERO VER: 0210 (H :00 B :00) DATE: 02/05/2015 PATH: C:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C: FORMAN~1 D: M8H.CAP
  • Asus MAXIMUS VIII HERO | User Guide - Page 135
    the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. Chapter 3 ASUS MAXIMUS VIII HERO 3-59
  • Asus MAXIMUS VIII HERO | User Guide - Page 136
    Chapter 3 3-60 Chapter 3: BIOS Setup
  • Asus MAXIMUS VIII HERO | User Guide - Page 137
    optical drive. 2. In the AutoPlay dialog box, click Run ASSETUP.exe. Chapter 4 If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file SETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. ASUS MAXIMUS VIII HERO 4-1
  • Asus MAXIMUS VIII HERO | User Guide - Page 138
    the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities tab before opening the files. To read about your motherboard's utility guide: 1. Click Manual
  • Asus MAXIMUS VIII HERO | User Guide - Page 139
    Windows® 7 OS 1. Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click Run ASSETUP.exe then select the Utilities tab Chapter 4 3. From the Utilities tab, check AI Suite 3 and select Install, then follow the succeeding onscreen instructions. ASUS MAXIMUS VIII HERO 4-3
  • Asus MAXIMUS VIII HERO | User Guide - Page 140
    DVD into the optical drive then follow onscreen instructions. 2. From the ASUS motherboard support DVD main menu, select the Utilities tab and check AI Suite 3 and select Install. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the
  • Asus MAXIMUS VIII HERO | User Guide - Page 141
    Suite 3 main menu bar Chapter 4 • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS MAXIMUS VIII HERO 4-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 142
    4.5 Dual Intelligent Processors 5 ASUS Dual Intelligent Processors 5 combines TPU, EPU, usage to provide the best system status. It covers the essential areas such as CPU performance, energy saving, stable digital power, cool and quiet fan control, and . Chapter 4 4-6 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 143
    the adjustments • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Frequency in TPU. Refer to the BIOS chapter of your motherboard's user guide for details. • The CPU Frequency bars show the status of the CPU cores, which vary with your CPU model. ASUS MAXIMUS VIII HERO 4-7
  • Asus MAXIMUS VIII HERO | User Guide - Page 144
    GPU Boost CPU Graphics Voltage Adjustments Click to load the saved profile Click to save the Click to enable the adjustment into a profile default settings Click to apply the adjustments Click to undo the adjustments Chapter 4 4-8 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 145
    profile Tick to select a setting for Voltage Decrement Click to enable the default settings Click to undo the Click to apply the adjustments adjustments Chapter 4 ASUS MAXIMUS VIII HERO 4-9
  • Asus MAXIMUS VIII HERO | User Guide - Page 146
    performance. The following screens are for reference only. Configuration options varies depending on the motherboard model. Click to switch between screens Click to undo the changes Click to apply the changes CPU Power Phase Control Increase the phase number under a heavy system load to get more
  • Asus MAXIMUS VIII HERO | User Guide - Page 147
    to customize Click to maximize the fan speed Click to set the balanced configuration between the fan's noise level and speed Click to switch between CPU and chassis fan screens Click to increase the fan's speed for a high cooling capability Chapter 4 ASUS MAXIMUS VIII HERO 4-11
  • Asus MAXIMUS VIII HERO | User Guide - Page 148
    setting of an application. When an application is on the Turbo App List, you can allocate the CPU frequency, assign a network priority, and define the audio setting of the selected application. Click to on the Turbo App List can be configured. Chapter 4 4-12 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 149
    AI Suite 3 main menu, then select Ai Ai Charger+ is available only in selected motherboard models. Ai Charger+ screen Tick to enable or disable Ai Charger+ Click to apply Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. ASUS MAXIMUS VIII HERO 4-13 Chapter 4
  • Asus MAXIMUS VIII HERO | User Guide - Page 150
    3.1 Boost. Refer to the Rear I/O connection section of your user guide for more details. • USB 3.1 Boost automatically detects the USB devices that support UASP. For a list of UASP-supported USB devices, visit the ASUS website at www.asus.com. • The data transfer speed varies with USB devices. For
  • Asus MAXIMUS VIII HERO | User Guide - Page 151
    3 main menu, then click EZ Update on the AI Suite 3 main menu bar. EZ Update screen Click to automatically update your motherboard's driver, software and firmware Click to search and select the BIOS file Click to select a boot logo Click to update the BIOS Chapter 4 ASUS MAXIMUS VIII HERO 4-15
  • Asus MAXIMUS VIII HERO | User Guide - Page 152
    displays the detailed information and settings of the installed motherboard, CPU, and memory. Launching the System Information To launch System Information, click on the left of the AI Suite 3 main menu, then select System Information. Viewing the motherboard information Click the MB tab to view the
  • Asus MAXIMUS VIII HERO | User Guide - Page 153
    Viewing the SPD information Click the SPD tab to view the memory's information. Chapter 4 ASUS MAXIMUS VIII HERO 4-17
  • Asus MAXIMUS VIII HERO | User Guide - Page 154
    Hotkey for Audio Mode Select device for Keyboard/Mouse sharing Select device for audio Audio Mode Click to apply the settings Chapter 4 4-18 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 155
    your computer that you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. ASUS MAXIMUS VIII HERO 4-19 Chapter 4
  • Asus MAXIMUS VIII HERO | User Guide - Page 156
    device Tick to select the smart device Tick to send alert when the selected items are back to its normal status Chapter 4 4-20 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 157
    sent messages Tap to scan more host computers Tick to select the smart device Click to send your message Tap to delete PC alerts Chapter 4 ASUS MAXIMUS VIII HERO 4-21
  • Asus MAXIMUS VIII HERO | User Guide - Page 158
    4.6 ROG Audio features Installing the Software Follow the installation wizard to install the Realtek® Audio Manager driver from the support DVD that is bundled with the motherboard. If the Realtek® audio software is correctly installed, you will find the Realtek® HD Audio Manager icon on the taskbar
  • Asus MAXIMUS VIII HERO | User Guide - Page 159
    the Equalizer is enabled. This item allows you to configure the Equalizer settings. You can manually set or customized your setting or choose from any of the preset equalizer settings available. Click this button to change the language or view the tutorial. Chapter 4 ASUS MAXIMUS VIII HERO 4-23
  • Asus MAXIMUS VIII HERO | User Guide - Page 160
    the play button to start the test for the selected preset profile. Noise Gate mode Click to choose the Noise Gate mode from Auto or Manual. Manual mode allows you to use the slider to adjust the Noise Gate and Noise Reduction. 4-24 Chapter 4: Software
  • Asus MAXIMUS VIII HERO | User Guide - Page 161
    Casting Enhancer Chapter 4 ASUS MAXIMUS VIII HERO 4-25
  • Asus MAXIMUS VIII HERO | User Guide - Page 162
    set at Powerful > 150 ohms Amplify Level is automatically set at Extreme Other device The device plugged in detected as other device 4-26 Chapter 4: Software Support Chapter 4
  • Asus MAXIMUS VIII HERO | User Guide - Page 163
    After you close the pop-window, Sonic SenseAmp enters speaker configuration and displays the adjusted headphone impedance. Click to manually adjust the amplify level Displays the impedance of your headphone Chapter 4 ASUS MAXIMUS VIII HERO 4-27
  • Asus MAXIMUS VIII HERO | User Guide - Page 164
    DTS Connect DTS Connect delivers excellent audio entertainment across all formats and works with 4, 5.1 and 7.1 channels of incredible surround sound . It also allows you to connect your PC to a home theatre system. Control settings panel Chapter 4 4-28 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 165
    start the test tone Use the sliders to adjust the settings Displays the list of games Control Menu Allows you to configure shortcut keys. Chapter 4 ASUS MAXIMUS VIII HERO 4-29
  • Asus MAXIMUS VIII HERO | User Guide - Page 166
    are enabled with shortcut keys in the game. Refer to the Controls tab for more information about the shortcut key settings. Chapter 4 4-30 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 167
    Game, Media Streaming and File Sharing) facilitating different user scenarios. Users can also manually allocate bandwidth and adjust priority settings of each application to run faster and smoother . File Sharing Mode File-sharing packets given top priority. Chapter 4 ASUS MAXIMUS VIII HERO 4-31
  • Asus MAXIMUS VIII HERO | User Guide - Page 168
    and uploading bandwidth of currently used applications. Total usage Displays the total downloading and uploading bandwidth of the currently used applications. Chapter 4 4-32 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 169
    apply the speed after manually keying in the desired speed or after you performing the speed test Using the Network Information Displays information about the physical network card such as speed, physical address, IP address, subnet mask, and default gateway. Chapter 4 ASUS MAXIMUS VIII HERO 4-33
  • Asus MAXIMUS VIII HERO | User Guide - Page 170
    specific or several tasks at the same time. You can also configure your PC for overclocking, or enter BIOS directly. 1. Connect the USB keyboard into the dedicated KeyBot USB port. Refer to the Rear I/O corresponding keys on the keyboard Smart Input Chapter 4 4-34 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 171
    Function Keys Shortcut Chapter 4 ASUS MAXIMUS VIII HERO 4-35
  • Asus MAXIMUS VIII HERO | User Guide - Page 172
    stream your favorite movie to a smart TV using your PC or smart device. • Ensure to enable the DLNA setting of your devices first. • ASUS Media Streamer supports NFC function. • Ensure to install ASUS HomeCloud on your PC. • An Internet connection is required to fully utilize this feature. To use
  • Asus MAXIMUS VIII HERO | User Guide - Page 173
    proceed with the deletion or addition of files Click to cancel changes The following media formats are supported: .3gp, .mp4, .m4a, .aac, .ts, .flac, .mp3, .mid, .xmf, .mxmf, .rtttl, .rtx, .ota, .imy, .ogg, .mkv, .wav, .jpg, .gif, .png, .bmp, .webp, .webm Chapter 4 ASUS MAXIMUS VIII HERO 4-37
  • Asus MAXIMUS VIII HERO | User Guide - Page 174
    Memory Allocation function Move the slider to the right to set the size allocation Click to finish creating the RAMDisk drive Chapter 4 4-38 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 175
    space. Click to select where to create a junction point. Click to finish adding the new junction point. Click to delete the existing junction point. Chapter 4 ASUS MAXIMUS VIII HERO 4-39
  • Asus MAXIMUS VIII HERO | User Guide - Page 176
    Synchronizing backup files After creating a junction point, RAMDisk automatically creates a backup folder in the file's original location. Use RAMDisk to manually synchronize updates with these backup files. Click Synchronize to update your files Chapter 4 4-40 Chapter 4: Software Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 177
    compare with other users on the ROG website. MemTweakIt functions depends on the chipset on the motherboard. Each chipset has differernt options. To use MemTweakIt, double-click on the desktop. Click a Click to apply your settings Click to validate your settings. ASUS MAXIMUS VIII HERO 4-41
  • Asus MAXIMUS VIII HERO | User Guide - Page 178
    1. Launch MemTweakIt and click Validate. 2. In Manual Mode, click Save Validation File. 3. Key in a file name for your configuration file and click Submit. 4. Click validation webpage. 5. In MemTweakIt - Validation File Upload window, key in your ASUS account ID and password. 6. Click Browse, locate
  • Asus MAXIMUS VIII HERO | User Guide - Page 179
    information and status of your CPU, motherboard, memory, graphics card, and other components installed in your system. You can generate a report about your system info and send or post it on the CPU-Z website. To use ROG CPU-Z, double-click on the desktop. Chapter 4 ASUS MAXIMUS VIII HERO 4-43
  • Asus MAXIMUS VIII HERO | User Guide - Page 180
    . 2. Select cache size and then click Start. • You can only cache one partition at a time. • Min and Max amounts of RAM at disposal is automatically updated. 4-44 Chapter 4: Software Support Chapter 4
  • Asus MAXIMUS VIII HERO | User Guide - Page 181
    motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 10 and RAID 5 configuration. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver for this setup. ASUS MAXIMUS VIII HERO 5-1
  • Asus MAXIMUS VIII HERO | User Guide - Page 182
    Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays
  • Asus MAXIMUS VIII HERO | User Guide - Page 183
    allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS MAXIMUS VIII HERO 5-3
  • Asus MAXIMUS VIII HERO | User Guide - Page 184
    RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done 5-4 Chapter 5: RAID Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 185
    to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. ASUS MAXIMUS VIII HERO 5-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 186
    "Volume0"? (Y/N): 3. Press to delete the RAID set and return to the utility main menu, or press to return to the DELETE VOLUME menu. 5-6 Chapter 5: RAID Support
  • Asus MAXIMUS VIII HERO | User Guide - Page 187
    drive. 5. Save changes and exit BIOS. 6. When the Make Disk menu appears, press to create a RAID driver disk. 7. Insert a formatted floppy disk into the USB floppy disk drive, then press . 8. Follow the succeeding screen instructions to complete the process. ASUS MAXIMUS VIII HERO 5-7
  • Asus MAXIMUS VIII HERO | User Guide - Page 188
    disk. 3. Place the motherboard support DVD into the optical drive. 4. Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process
  • Asus MAXIMUS VIII HERO | User Guide - Page 189
    a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may for compliance could void the user's authority to operate this equipment. Appendix ASUS MAXIMUS VIII HERO A-1
  • Asus MAXIMUS VIII HERO | User Guide - Page 190
    Appendix IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry
  • Asus MAXIMUS VIII HERO | User Guide - Page 191
    our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment License. ASUS MAXIMUS VIII HERO A-3
  • Asus MAXIMUS VIII HERO | User Guide - Page 192
    ai requisiti essenziali e alle altre disposizioni pertinenti alle direttive CE. Per maggiori informazioni fate riferimento alla dichiarazione di conformità CE. ASUS AsusTek Inc CE CE Hrvatski AsusTek Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovaraju
  • Asus MAXIMUS VIII HERO | User Guide - Page 193
    Str. 21-23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923 Support Fax +49-2102-9599-11 Online support http://www.asus.com/de/support/ ASUS MAXIMUS VIII HERO A-5
  • Asus MAXIMUS VIII HERO | User Guide - Page 194
    ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Model name : Motherboard MAXIMUS VIII HERO conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN 55022
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
Motherboard
MAXIMUS
VIII HERO