Asus MAXIMUS VIII HERO User Guide - Page 95
CPU System Agent Boot Voltage [Auto]
View all Asus MAXIMUS VIII HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
DO NOT remove the thermal module. The thermal conditions should be monitored. The following item appears only when you set the DRAM Switching Frequency to [Manual]. Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for a quicker transient response speed. Use the or to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz. Do not remove the thermal module when the manual mode is selected. The thermal conditions should be monitored. Boot Voltages CPU Core/Cache Boot Voltage [Auto] The voltage for CPU at initial boot. Configuration options: [Auto] [0.600] - [1.700] DMI Boot Voltage [Auto] The voltage for DMI at initial boot. Configuration options: [Auto] [0.300] - [1.900] Core PLL Boot Voltage [Auto] The voltage for Core PLL at initial boot. Configuration options: [Auto] [0.70000] - [2.40000] CPU System Agent Boot Voltage [Auto] The voltage for CPU System Agent at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] CPU VCCIO Boot Voltage [Auto] The voltage for CPU VCCIO at initial boot. Configuration options: [Auto] [0.7000] - [1.8000] Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) [Enabled] Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Enabled] [Disabled] Turbo Mode [Enabled] Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS MAXIMUS VIII HERO 3-19