Asus My Cinema 7131 Hybrid My Cinema Series User Guide for English Edition - Page 16

Before you proceed

Page 16 highlights

LED information For models with two (2) LEDs Color Description LED 1 (Green) Good signal LED 2 (Orange) Poor signal For models with one (1) LED LED On/Off Description LED On Good signal LED Off Poor signal 1.3 Before you proceed Take note of the following precautions before you install the ASUS TV Tuner Card/Box. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. • Keep all components, such as the host adapter, in their antistatic bag until you are ready to install them. Likewise, whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with it. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, 1- Chapter 1: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

1-·
Chapter 1: Hardware information
LED information
For models with two (2) LEDs
Color
Description
LED 1 (Green)
Good signal
LED 2 (Orange)
Poor signal
For models with one (1) LED
LED On/Off
Description
LED On
Good signal
LED Off
Poor signal
1.3
Before you proceed
Take note of the following precautions before you install the ASUS TV Tuner
Card/Box.
Unplug the power cord from the wall socket before touching any
component.
Use a grounded wrist strap or touch
a safely grounded object or a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Keep all
components, such as the host adapter, in their antistatic bag
until you are ready to install them. Likewise, whenever you uninstall any
component, place it on a grounded antistatic pad or in the bag that came
with it.
Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals,