Asus P1-AH1 P1-AH1 User''s Manual for English Edition - Page 24

Reinstalling the CPU fan and, heatsink assembly

Get Asus P1-AH1 PDF manuals and user guides View all Asus P1-AH1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

2.6.3 Reinstalling the CPU fan and heatsink assembly To reinstall the CPU fan and heatsink assembly: 1. Position the CPU fan and heatsink assembly on top of the installed CPU. 2. Connect the CPU cable to the CPU fan connector on the motherboard. 3. Align the metal clips to the side rail of the CPU fan and heatsink assembly, with the locking levers in the reverse orientation. 3 4. Snap the hook of each metal clip into 4 the hole of the retention module. 5 5. Carefully press down the locking lever and hook its end into the retention module. 6. Position the blower on top of the CPU fan and heatsink assembly as shown. 7. Secure the blower to the CPU fan and heatsink assembly with the screws you removed earlier. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connect. 2-8 Chapter 2: Basic installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
2-8
Chapter 2: Basic installation
2.6.3
Reinstalling the CPU fan and
heatsink assembly
To reinstall the CPU fan and heatsink assembly:
1.
Position the CPU fan and heatsink
assembly on top of the installed
CPU.
2.
Connect the CPU cable to the
CPU fan connector on the
motherboard.
3.
Align the metal clips to the side rail of
the CPU fan and heatsink assembly,
with the locking levers in the reverse
orientation.
4.
Snap the hook of each metal clip into
the hole of the retention module.
5.
Carefully press down the locking lever
and hook its end into the retention module.
3
4
5
6.
Position the blower on top of the CPU
fan and heatsink assembly as shown.
7.
Secure the blower to the CPU fan and
heatsink assembly with the screws
you removed earlier.
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connect.