Asus P3-P5G33 User Manual - Page 61
Chassis intrusion connector 4-1 pin CHASSIS, Front panel audio connector 10-1 pin AAFP
UPC - 610839953172
View all Asus P3-P5G33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5K-VM +5VSB_MB Chassis Signal GND ® CHASSIS P5K-VM Chassis intrusion connector (Default) 11. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. P5K-VM AAFP SENSE2_RETUR SENSE1_RETUR PRESENCE# GND PORT2 L SENSE_SEND PORT2 R PORT1 R PORT1 L HD Audio-compliant pin definition ® NC NC NC AGND P5K-VM Analog front panel connector Line out_L NC Line out_R MICPWR MIC2 Legacy AC '97 audio pin definition • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio]; if you want to connect an AC'97 front panel audio module to this connector, set the item to [AC'97]. By default, this connector is set to [HD Audio]. See section 5.4.3 Onboard Devices Configuration for details. ASUS P3-P5G33 4-11