Asus P5B-MX P5B-MX user's manual - Page 47
Chassis intrusion connector 4-1 pin CHASSIS, Front panel audio connector 10-1 pin AAFP
UPC - 610839140558
View all Asus P5B-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
8. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and " Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. R P5B-MX/WiFi-AP CHASSIS GND Chassis Signal (Default) +5VSB_MB P5B-MX/WiFi-AP Intrusion Connector 9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. Azalia-compliant pin definition Legacy AC'97-compliant pin definition R P5B-MX/WiFi-AP AGND PRESENSE# MIC2_JD HP_HD AGND NC NC NC MIC2_L MIC2_R Line out_R NC Line out_L MIC2_L MIC2_R HP_R Jack_Sense HP_L AAFP P5B-MX/WiFi-AP Front Panel Audio Connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • By default, this connector is set to HD Audio. ASUS P5B-MX/WiFi-AP 1-35