Asus P5B-Plus VISTA Edition P5B-Plus series user's manual - Page 53
Internal connectors
View all Asus P5B-Plus VISTA Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. FLOPPY NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. ® P5B-PLUS P5B-PLUS Floppy disk drive connector 2. JMicron JMB363® Serial ATA RAID connector (7-pin SATA_RAID) This connector is for a Serial ATA signal cable. This connector supports a Serial ATA hard disk drive, which you can combine with an external Serial ATA hard disk drive to configure for RAID via the onboard Serial ATA RAID controller. The JMicron JMB363 controller item in the BIOS is set to [IDE] by default. ® P5B-PLUS GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND SATA_RAID P5B-PLUS SATA_RAID connector Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you CANNOT enter the JMicron® JMB363 RAID utility and SATA BIOS setup during POST. ASUS P5B-Plus Series 2-27