Asus P5BV P5B-V User Manual for English Edition - Page 51

JMicron JMB363, Serial ATA RAID connector 7-pin SATA_RAID [black], Optical drive audio connector 4-

Get Asus P5BV - Motherboard - ATX PDF manuals and user guides
UPC - 610839159055
View all Asus P5BV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

R P5B-V GND RSATA _TXP1 RSATA _TXN1 GND RSATA _RXP1 RSATA _RXN1 GND 4. JMicron JMB363® Serial ATA RAID connector (7-pin SATA_RAID [black] ) This connector is for a Serial ATA signal cable that supports a Serial ATA hard disk drive. To configure RAID 0, RAID 1, or JBOD, install an internal Serial ATA hard disk drive to this connector and an external Serial ATA drive to the external SATA port. The JMicron SATA controller mode item in the BIOS is set to [IDE] by default. Set the item to [RAID] if you want to build a RAID set. See section "4.4.6 Onboard Device Configuration" for details. SATA_RAID1 P5B-V SATA RAID Connector Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you cannot enter the JMicron® JMB363 RAID utility and SATA BIOS setup during POST. 5. Optical drive audio connector (4-pin CD) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. R P5B-V Right Audio Channel Ground Ground Left Audio Channel CD (black) P5B-V Internal Audio Connector ASUS P5B-V 2-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
ASUS P5B-V
2-27
4.
JMicron JMB363
®
Serial ATA RAID connector (7-pin SATA_RAID [black] )
This connector is for a Serial ATA signal cable that supports a Serial ATA hard
disk drive. To configure RAID 0, RAID 1, or JBOD, install an internal Serial
ATA hard disk drive to this connector and an external Serial ATA drive to the
external SATA port.
The
JMicron SATA controller mode
item in the BIOS is set to [IDE] by default.
Set the item to [RAID] if you want to build a RAID set. See section “4.4.6
Onboard Device Configuration” for details.
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron
®
JMB363 RAID utility and SATA
BIOS setup during POST.
P5B-V
P5B-V
SATA RAID Connector
SATA_RAID1
GND
RS
ATA
_TXP1
RSATA _TXN1
GND
RSATA _RXP1
RSATA _RXN1
GND
5.
Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
P5B-V
P5B-V
Internal Audio Connector
CD
(black)
Right Audio Channel
Left Audio Channel
Ground
Ground