Asus P5E DELUXE GREEN User Manual - Page 57
This connector is for an additional Sony/Philips Digital Interface S/PDIF
View all Asus P5E DELUXE GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. 8. Digital audio connector (4-1 pin SPDIF_OUT for ASUS HDMI VGA card) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). If you are using an ASUS HDMI-equipped graphics card, connect the HDMI card to this connector with a S/PDIF Out cable. The ASUS HDMI-equipped graphics card and the S/PDIF Out cable are purchased separately. ASUS P5E Deluxe 2-31