Asus P5E-V HDMI User Manual - Page 96

Memory Remap Feature [Enabled] Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system. Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI] Internal Graphics Mode Select [Enabled, 8MB] Allows you to decide whether to use the internal graphics device and select the amount of memory used by the device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB] PEG Port Control [Auto] Configuration options: [Auto] [Disabled] PEG Force x1 [Disabled] This item appears when the PEG Port Control item is set to [Auto]. Configuration options: [Enabled] [Disabled] The following item appears only when you use the onboard VGA function and set the Internal Graphics Mode Select item to [Enabled, 1MB] or [Enabled, 8MB]. Video Function Configuration Advanced Video Function Configuration BIOS SETUP UTILITY DVMT Mode Select DVMT/FIXED Memory HDMI Support [DVMT Mode] [256MB] [Enabled] Options Fixed Mode DVMT Mode DVMT Mode Select [DVMT Mode] Configuration options: [Fixed Mode] [DVMT Mode] DVMT/FIXED Memory [256MB] Configuration options: [128MB] [256MB] [Maximum DVMT] The [Maximum DVMT] option signifies 384MB memory. This option appears only when you install DIMM modules more than 1 GB. HDMI Support [Enabled] Enables or disables the onboard HDMI function. Configuration options: [Disabled] [Enabled] 4-24 Chapter 4: BIOS setup