Asus P5E-VM User Manual - Page 83

Some of the following items appear when you set AI Overclocking to [Manual] and [N.O.S.] CPU Ratio Control [Auto] Configuration options: [Auto] [Manual] The following item appears when the CPU Ratio Control item is set to [Manual]. Ratio CMOS Setting [9] Use the and keys to select the CMOS ratio values. FSB Strap to North Bridge [Auto] FSB Strap will be adjusted automatically by FSB Frequency and DRAM Frequency. Configuration options: [Auto] [200MHz] [266MHz] [333MHz]. The following two items only appear when you set the Ai Overclocking item to [Manual]. FSB Frequency [333] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the and keys to adjust the FSB frequency. You can also type the desired CPU frequency using the numeric keypad. The values range from 200 to 800. Refer to the table below for the correct Front Side Bus and CPU External Frequency settings. FSB/CPU External Frequency Synchronization Front Side Bus FSB 1066 FSB 800 CPU External Frequency 266 MHz 200 MHz PCIE Frequency [Auto] Allows you to set the PCI Express frequency. Configuration options: [Auto] [100] [101] ~ [149] [150] DRAM Frequency [Auto] Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [DDR2-667MHz] [DDR2-800MHz] [DDR2-834MHz] [DDR2-888MHz] [DDR2-1000MHz] [DDR2-1112MHz] [DDR2-1333MHz] Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. DRAM Timing Control [Auto] Allows you to set the DRAM timing control. Configuration options: [Auto] [Manual] ASUS P5E-VM HDMI 4-17