Asus P5G-MX User Manual - Page 64
Enhanced C1 Control [Auto], CPU Internal Thermal Control [Auto], Virtualization Technology [Enabled
View all Asus P5G-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Enhanced C1 Control [Auto] When set to [Auto], the BIOS will automatically check the CPU's capability to enable the C1E support. In C1E mode, the CPU power consumption is lower when idle. Configuration options: [Auto] [Disabled] CPU Internal Thermal Control [Auto] Disables or sets the CPU internal thermal control. Configuration options: [Auto] [Disabled] Virtualization Technology [Enabled] Allows you to enable or disable the processor Virtualization Technology. Configuration options: [Disabled] [Enabled] The following item appears only when you installed an Intel® Core™ 2 Duo and later processors that supports the Enhanced Intel SpeedStep® Technology (EIST). Intel(R) SpeedStep(TM) tech [Enabled] Allows you to use the Enhanced Intel SpeedStep® Technology. When set to [Enabled], you can adjust the system power settings in the operating system to use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled] [Disabled] 2.4.3 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced Chipset Settings DRAM Frequency [Auto] Configure DRAM Timing by SPD [Enabled] Hyper Path 3 [Auto] DRAM Throttling Threshold [Auto] Boot Graphic Adapter Priority [PCI Express/Int-VG] Internal Graphics Mode Select [Enabled, 8MB] Graphics memory type [Auto] Boot Display Device [Auto] TV Connector [Auto] HDTV Output [Auto] TV Standard [VBIOS-Default] PEG Buffer Length [Auto] Link Latency [Auto] PEG Root Control [Auto] Slot Power [Auto] High Priority Port Select [Disabled] Manual DRAM Frequency SettingorAuto by SPD Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 2-20 Chapter 2: BIOS setup