Asus P5G41T-M LX User Manual - Page 23

Memory configurations - memory list

Page 23 highlights

1.7.2 Memory configurations You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS. - Install a 64-bit Windows® OS when you want to install 4GB or more memory on the motherboard. • This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient cooling system to support a full memory load (2 DIMMs) or overclocking conditions. P5G41T-M LX Motherboard Qualified Vendors Lists (QVL) DDR3-1066 MHz capability Vendor Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage DIMM socket support (Optional) A* B* Crucial CT12864BA1067.8FF 1024MB SS Micron 9GF22D9KPT 7 - • • Crucial CT25664BA1067.16FF 2048MB DS Micron 9HF22D9KPT 7 - • • ELPIDA EBJ10UE8EDF0-AE-F 1024MB SS ELPIDA J1108EDSE-DJ-F - 1.35V(low voltage) • • Elpida EBJ51UD8BAFA-AC-E 512MB SS Elpida J5308BASE-AC-E - - • • Elpida EBJ51UD8BAFA-AE-E 512MB SS Elpida J5308BASE-AC-E - - • • Elpida EBJ11UD8BAFA-AE-E 1024MB DS Elpida J5308BASE-AC-E - - • • ELPIDA EBJ21UE8EDF0-AE-F 2048MB DS ELPIDA J1108EDSE-DJ-F - 1.35V(low voltage) • • Kingston KVR1066D3N7/1G 1024MB SS Kingston D1288JEKAPGA7U 7 1.5V • • Kingston KVR1066D3N7/2G 2048MB DS Kingston D1288JEKAPGA7U 7 1.5V • • Micron MT8JTF12864AZ-1G1F1 1024MB SS Micron 9GF22D9KPT 7 - • • Micron MT16JTF25664AZ-1G1F1 2048MB DS Micron 9HF22D9KPT 7 - • • SAMSUNG M378B2873EH1-CF8 1024MB SS Samsung SEC 901 HCF8 K4B1G0846E - - • • SAMSUNG M378B5273BH1-CF8 4096MB DS SAMSUNG 846 K4B2G0846B-HCF8 - - • • Elixir M2Y2G64CBHA9N-BE 2048MB DS - - 7-7-7-20 - • • Kingtiger 2GB DIMM PC3-8500 2048MB DS Hynix H5TQ1G83AFP G7C - - • • ASUS P5G41T-M LX 1-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

ASUS P5G41T-M LX
1-13
1.7.2
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the
DIMM sockets.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Use a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
-
Install a 64-bit Windows
®
OS when you want to install 4GB or more memory on
the motherboard.
This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a lower
frequency than the vendor-marked value.
For system stability, use a more efficient cooling system to support a full memory load (2
DIMMs) or overclocking conditions.
P5G41T-M LX Motherboard Qualified Vendors Lists (QVL)
DDR3-1066 MHz capability
Vendor
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
A*
B*
Crucial
CT12864BA1067.8FF
1024MB
SS
Micron
9GF22D9KPT
7
-
Crucial
CT25664BA1067.16FF
2048MB
DS
Micron
9HF22D9KPT
7
-
ELPIDA
EBJ10UE8EDF0-AE-F
1024MB
SS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low
voltage)
Elpida
EBJ51UD8BAFA-AC-E
512MB
SS
Elpida
J5308BASE-AC-E
-
-
Elpida
EBJ51UD8BAFA-AE-E
512MB
SS
Elpida
J5308BASE-AC-E
-
-
Elpida
EBJ11UD8BAFA-AE-E
1024MB
DS
Elpida
J5308BASE-AC-E
-
-
ELPIDA
EBJ21UE8EDF0-AE-F
2048MB
DS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low
voltage)
Kingston
KVR1066D3N7/1G
1024MB
SS
Kingston
D1288JEKAPGA7U
7
1.5V
Kingston
KVR1066D3N7/2G
2048MB
DS
Kingston
D1288JEKAPGA7U
7
1.5V
Micron
MT8JTF12864AZ-1G1F1
1024MB
SS
Micron
9GF22D9KPT
7
-
Micron
MT16JTF25664AZ-1G1F1
2048MB
DS
Micron
9HF22D9KPT
7
-
SAMSUNG
M378B2873EH1-CF8
1024MB
SS
Samsung
SEC 901 HCF8 K4B1G0846E
-
-
SAMSUNG
M378B5273BH1-CF8
4096MB
DS
SAMSUNG
846 K4B2G0846B-HCF8
-
-
Elixir
M2Y2G64CBHA9N-BE
2048MB
DS
-
-
7-7-7-20
-
Kingtiger
2GB DIMM PC3-8500
2048MB
DS
Hynix
H5TQ1G83AFP G7C
-
-