Asus P5GC MX 1333 User Manual - Page 45

11. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. F_PANEL P5GC-MX/1333 R PWR LED PWR BTN HDLED RESET GND PWR PLEDPLED+ Reset Ground IDELEDIDELED+ P5GC-MX/1333 System Panel Connector • System power LED (2-pin PWRLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin HDLED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWRBTN) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS P5GC-MX/1333 1-33