Asus P5K-VM Motherboard Installation Guide - Page 75
Legacy USB Support [Auto]
View all Asus P5K-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
USB Functions [Enabled] USB Host Controller Enabled Disabled] [Enabled]。 USB 2.0 Controller [Enabled] USB 2.0 Enabled] [Disabled]。 USB 2.0 Controller Mode [HiSpeed] USB 2.0 HiSpeed( 480 Mbps)與 Full Speed(12 Mbps USB 2.0 Controller Full Speed] [HiSpeed]。 BIOS EHCI Hand-off [Enabled] EHCI hand-off Disabled] [Enabled]。 Port 64/60 Emulation [Disabled] I/O 60h/64h USB 支持的 OS 上使用 USB Disabled] [Enabled]。 Legacy USB Support [Auto] USB Auto USB USB Disabled USB USB Disabled] [Enabled] [Auto]。 華碩 P5K-VM 2-21
±-±1
華碩 P5K-VM 主板用戶手冊
USB Functions [Enabled]
本項目可以用來啟動或關閉 USB Host Controller 的功能。以下的子
選項只有在本項目設置為 [Enabled] 時才會出現。設置值有:[Disabled]
[Enabled]。
USB 2.0 Controller [Enabled]
本項目用來啟動或關閉 USB 2.0 控制器。設置值有:[Enabled]
[Disabled]。
USB 2.0 Controller Mode [HiSpeed]
本項目用來設置 USB 2.0 設備的傳輸速率模式。設置值分別有 HiSpeed(
480 Mbps)與 Full Speed(12 Mbps)模式。本項目只有在您啟動了 USB
2.0 Controller 項目時才會出現。設置值有:[Full Speed] [HiSpeed]。
BIOS EHCI Hand-off [Enabled]
本項目用來啟動支持沒有 EHCI hand-off 功能的操作系統。設置值:
[Disabled] [Enabled]。
Port 64/60 Emulation [Disabled]
本項目可讓您開啟或關閉 I/O 連接端口 60h/64h 的模擬支持。若要在無
USB 支持的 OS 上使用 USB 鍵盤,則本項目需設置為開啟。設置值有:
[Disabled] [Enabled]。
Legacy USB Support [Auto]
本項目用來啟動或關閉支持 USB 設備功能。當設置為缺省值 [Auto] 時,
系統可以在開機時便自動檢測是否有 USB 設備存在,若是,則啟動 USB 控
制器;反之則不會啟動。但是若您將本項目設置為 [Disabled] 時,那麼無論
是否存在 USB 設備,系統內的 USB 控制器都處於關閉狀態。設置值有:
[Disabled] [Enabled] [Auto]。