Asus P5K-VM P5K-VM user's manual - Page 39
USB device wake-up 3-pin USBPW1-4, USBPW5-8, USBPW9-12, Keyboard power 3-pin KBPWR - keyboard not powering up
View all Asus P5K-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. P5K-VM KBPWR 2 1 +5V (Default) 3 2 +5VSB ® P5K-VM Keyboard power setting 3. USB device wake-up (3-pin USBPW1-4, USBPW5-8, USBPW9-12) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes. The USBPW1-4 jumpers are for the rear USB ports. The USBPW5-8 and USBPW910 jumpers are for the internal USB connectors that you can connect to additional USB ports. P5K-VM USBPW1-4 2 1 +5V (Default) 3 2 +5VSB USBPW5-8 2 1 +5V (Default) 3 2 +5VSB ® USBPW9-12 12 23 P5K-VM USB device wake-up +5V (Default) +5VSB • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system will not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS P5K-VM 1-27