Asus P5K3 Premium WiFi-AP User Manual - Page 78
AHCI Configuration
View all Asus P5K3 Premium WiFi-AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Intel Robson Technology [Disabled] Allows you to enable or disable Intel Robson Technology. Configuration option: [Disabled] [Enabled] The Intel Robson Technology appears only when you set the item Configure SATA as to [AHCI]. Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be effective only if the device is accessed through BIOS. Configuration option: [Disabled] [Enabled] SATA Detect Time Out (Sec) [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4.3.7 AHCI Configuration This menu is the section for AHCI configuration. It appears only when you set the item Configure SATA as from the sub-menu of SATA Configuration to [AHCI]. AHCI Settings AHCI Port1 [Not Detected] AHCI Port2 [Not Detected] AHCI Port3 [Not Detected] AHCI Port4 [Not Detected] AHCI Port5 [Not Detected] AHCI Port6 [Not Detected] While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detection of IDE devices. AHCI Port1~6 [XXXX] Displays the status of auto-detection of SATA devices. AHCI Port1 Device :Not Detected SATA Port1 [Auto] Select the type of devices connected to the system. SATA Port1 [Auto] Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed] 4-14 Chapter 4: BIOS setup